Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Keen for oktoberfest ill be there.

Awesomesauce! See you there!

Fark :(. RIP.

anyone know a good smash repairer?

An Armaguard truck decided to use my 7 series as a bump stop yesterday and i needs to get it going again.

CDR will be doing some work on my car soon - http://cdrpaintandpanel.com.au/

They seem to have done a good job on Scott's cars.

I believe Chris Rogers also has a mob on the Northside somewhere he recommends.

you are the second person to say that to me now. I am feeling lucky though. i have some health and manage to still have some fun so i consider myself quite lucky. so many have it worse.

Have no idea how you maintain this positivity. Definitely need some of what ever it is that you're smoking!

Lol nice. I'll see how we go once the agent gets back to us on our second offer. If we get the place within 10k of the last offer car would be a definite possibility. Cake and eat it too awww yeah.

Lol nice. I'll see how we go once the agent gets back to us on our second offer. If we get the place within 10k of the last offer car would be a definite possibility. Cake and eat it too awww yeah.

Hate you! My house is causing me to lose cake at the moment.

at least the house is a good investment Bunts. Where otherwise cars are not!

This is true, and once the retail and dining precinct down the street is finished it will be worth a lot more than we paid so that's always nice, can use the equity to do some stuff we want to.

anyone know a good smash repairer?

An Armaguard truck decided to use my 7 series as a bump stop yesterday and i needs to get it going again.

CDR Paint and Panel in Archerfield. If you head there, tell Nicole or Jarad that I sent you. They'll look after you ;)

Awesomesauce! See you there!

Fark :(. RIP.

CDR will be doing some work on my car soon - http://cdrpaintandpanel.com.au/

They seem to have done a good job on Scott's cars.

I believe Chris Rogers also has a mob on the Northside somewhere he recommends.

/\ this.

Ive been thinking of importing one but thats looks like a good deal. Mmm need to low ball harder on the house so there is money left for car haha

If not, sell your body or your soul. Your call.

I sorta want it for myself! lol Buy that one, part the unicorn...profit!

Is it really worth parting the Unicorn out for it though?

at least the house is a good investment Bunts. Where otherwise cars are not!

This is true.

Is it really worth parting the Unicorn out for it though?

That car is many times more awesome than the unicorn. So yep.

Its tuned and repainted for starters, so say I could get the purchase price of that car for the unicorn in parts, I would end up with a resprayed, tuned car with bigger newer turbos for zero dollars and a bit of time

Edited by Bunta

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...