Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Manuals are evil

No

Gladly, yours would no doubt pay a fair bit better than mine

Yes but it can be a shitty job

And slow ;)

No

well see about that uncle Natro

This

Only time an auto should be in a jap car is if its a 2 or 3 speed and used for racing.....

And this

Trannys are good - I love me some Trannys

FYP

Going to be keeping all the associated turbo parts off the 25 skyine incase s*it breaks

Suggestions a for turbos for the dirty? Don't know whether twin or single

Something that's 300 to 350kw max, more than that is fairly unusable without big $$$ tires and borderline too laggy for daily use.

A gt30 with a .82 rear will drive almost as nice as a stock turbo 25, just that it has 300kw instead.

Something that's 300 to 350kw max, more than that is fairly unusable without big $$$ tires and borderline too laggy for daily use.

A gt30 with a .82 rear will drive almost as nice as a stock turbo 25, just that it has 300kw instead.

I reckon if you go to the trouble of building a 30/25 then you should choke it up with a small turbo like a GT30.

To get the true benefit of the change I reckon a GT35 or larger is a must.

In saying that Ive never been in a 30/35 running a GT30 variant so not sure how it would drive

Inestment home or residence colin?

Still undecided yet. Its nearly 1k a week rental at the moment so it will be tough to let that go lol. Would still get decent rent if we lived there and rented a few rooms but we dont know yet.

Yeah Ants capt barrel roll is me so wanna get into another one

I reckon if you go to the trouble of building a 30/25 then you should choke it up with a small turbo like a GT30.

To get the true benefit of the change I reckon a GT35 or larger is a must.

In saying that Ive never been in a 30/35 running a GT30 variant so not sure how it would drive

i had a 35 on mine, too much power for daily duties and enough power to make it about as reliable as a rotary. power came on hard at 3500-4000 and insta wheel spin on anything short of near new 255 semi slicks.

a GT30 with 0.82 would give near on stock turbo spool, but an extra 100kw, a 1.06 rear would tame it down from being so agressive onto boost, but obviously that comes with more lag.

GT30 size turbo is the SMALLEST you can go on the 3L without choking it.

check out the results AL from victoria got with his 3L with GT30, decent power/torque everywhere and the benefit of being able to keep it looking mostly stock if you wanted to, if i was to do my car again. thats the combo i would go for.

i had a 35 on mine, too much power for daily duties and enough power to make it about as reliable as a rotary. power came on hard at 3500-4000 and insta wheel spin on anything short of near new 255 semi slicks.

a GT30 with 0.82 would give near on stock turbo spool, but an extra 100kw, a 1.06 rear would tame it down from being so agressive onto boost, but obviously that comes with more lag.

GT30 size turbo is the SMALLEST you can go on the 3L without choking it.

check out the results AL from victoria got with his 3L with GT30, decent power/torque everywhere and the benefit of being able to keep it looking mostly stock if you wanted to, if i was to do my car again. thats the combo i would go for.

Guess mine will be interesting to steer then lol.

I'll have a look for those results. can never look at too many :-)

Still undecided yet. Its nearly 1k a week rental at the moment so it will be tough to let that go lol. Would still get decent rent if we lived there and rented a few rooms but we dont know yet.

Yeah Ants capt barrel roll is me so wanna get into another one

Congrats Col, I looked up 5 bed townhouses, I think I found the ad. Looks nice! If you are getting the stamp duty concession you need to live in it for 1 year with occupancy starting within one year, and renting out rooms counts as you not occupying it. Something to keep in mind!

Congrats Col, I looked up 5 bed townhouses, I think I found the ad. Looks nice! If you are getting the stamp duty concession you need to live in it for 1 year with occupancy starting within one year, and renting out rooms counts as you not occupying it. Something to keep in mind!

eggszachary

Guess mine will be interesting to steer then lol.

I'll have a look for those results. can never look at too many :-)

these results. i believe the full specs were somewhere in a mountain long thread. but it was from memory it was running a 9:1 comp ratio with some minor head work.

Just realised that i haven't updated my results.

Officially the engine is now out flowing the turbo, but i will not change the combo for anything.

Below is my full tune as it stands now.

attachicon.gifPower_Torque.JPG attachicon.gifHigh_Boost_AFR.JPG

The car has been booked in for next week to get the following done:

- Change exhaust and see if any gains are made. Currently i have the more quiet exhaust fitted and would like to compare this result with the Apexi cannon exhaust system i have laying around.

- Play with my cam gears. I still have VVT active, but have modified the std gear to also be adjustable.

- Clean up the afr. Dips too low up in the higher rev range.

- Play with the boost settings, to come on harder on high boost.

- Most important: Find a pair of tyres that will hold traction on the dyno. So far i have tried 4 different pairs of tyres and all have lost traction on full boost at high rpm. I have tried: Hankook K104's, Bridgestone RE55s, Toyo T1R's and another pair of cheap ass tyres from another 33. Anyone know of a good pair of dyno tyres????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...