Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

To take a positive turn out of this for a discussion: Do you think P platers should be limited in the vehicles they may drive, or should it simply be that further driver training is needed?

My opinion, it has nothing to do with the cars, if they're legal; they're legal for all.

After all, a stock Skyline hitting an object at 80klm/hr is the same result as a highly modified one of the same weight hitting the same object at the same speed (may be better with big brake mod).

I would die if I had even 200 kW.... That's why I wanted an NA, just the right amount of power for me :) and p plater legal :)

With alot of stock 33's coming to age a few would be p plater legal due to power loss.

And what a morning it is. Demo subbie hit the water main for the shopping centre. Centre evacuated everyone gone home, this is not going to be pretty

LOL Should have planned for that haha

Wet weather contingency

I am guessing hadn't shut it off and now shopping can be done by boat lol

Nah just not meant to hit it lol. Shutting it off shuts down the whole centre. Main water supply for the centre and no shut off valves in the ring main lol

To take a positive turn out of this for a discussion: Do you think P platers should be limited in the vehicles they may drive, or should it simply be that further driver training is needed?

My opinion, it has nothing to do with the cars, if they're legal; they're legal for all.

After all, a stock Skyline hitting an object at 80klm/hr is the same result as a highly modified one of the same weight hitting the same object at the same speed (may be better with big brake mod).

While I agree with you in theory...

New drivers should be learning in shit heaps. Learn much more driving a slow (and shakey) car fast than a fast car slow.

Aus will never have the driver edumacation required to make good drivers the norm.

Side note, new cars, even econo shit boxes would fare better hitting something at 80 than a skyline.

To take a positive turn out of this for a discussion: Do you think P platers should be limited in the vehicles they may drive, or should it simply be that further driver training is needed?

My opinion, it has nothing to do with the cars, if they're legal; they're legal for all.

After all, a stock Skyline hitting an object at 80klm/hr is the same result as a highly modified one of the same weight hitting the same object at the same speed (may be better with big brake mod).

When I was on my P's I was legally allowed to drive whatever I wanted. However, I spent most of my time on P's driving a stock FWD ford laser...

Looking back over the years, my cars have gotten progressively faster - not just in terms of HP but also in terms of the brakes, suspension work, that has been done. From the laser through various stock and modified N/A R31s, to the fairly stock wedge, to the wedge as she is now.

This has probably been more to do with the amount of money I had to spend on cars at those points in my life, rather than through any sensible decisions I have made or through laws forcing me to do it. The only sensible decisions I can really take credit for is probably always doing the braking/handling mods before the power mods.

However, I feel that the way my cars have progressed has meant that the car I am driving has been appropriately matched to my skill and confidence as a driver, and as these have progressed so has my car. I mean, if I had been driving the wedge as she is now when I was first on my P's, I most probably would have killed myself.

P platers, much as they like to think they are, are not driving gods. They have very limited experiencing and just because they can pass a driving test doesn't mean they can handle a sports car on the edge. Sports cars, driven hard, will tend to get you into trouble. That's the nature of the beast. Good sports cars will get you OUT of trouble just as well, IF you know what you're doing.

It takes time and experience to learn how to respond when you get into trouble, and while I certainly don't claim to be a driving god now either, I can say with some confidence I am a much better driver than when I was on my Ps...

So long story short, yes I think there should be restrictions on what cars P platers drive... I don't think the current rules are perfect - they could definitely be improved, but in principle I agree with them.

I don't think there should be a distinction between N/A and forced induction - a powerful N/A car will get you into just as much trouble as a powerful turbo car. A blanket HP limit combined with a power to weight limit, applied to all cars not just forced induction, would work well.

I don't think we need to stop P platers from modifying cars, if they want to do brake and handling upgrades why shouldn't they - as long as they do them legally and engineer them properly. And HP mods are OK too, as long as they keep to the power restrictions.

With all that said, more driving training would definitely not hurt either... you still can't fast track experience, but more training can give you a step in the right direction.

/rant

  • Like 1

I think its about time this topic was put to rest.

Yes its good to see some car chatter but people need to be reminded that this is a shit talking thread not an information thread.

I would hate to see one of our members attempt to take on a car above their skill limit and end up injuring or worse killing themselves.

Its bad for their family, the community and our reputation when everyone witnesses on the news another import wrapped around a tree.

This is why the hoon laws were introduced.

Mother Duck says remember the 50/50 rule and don't let your ego get in the way.

It's easy to get yourself into a situation but harder to get yourself out of it.

While I agree with you in theory...

New drivers should be learning in shit heaps.

Side note, new cars, even econo shit boxes would fare better hitting something at 80 than a skyline.

Shit heaps are more dangerous, than driving a well modified and legal car. If you have a car you like, you're less likely to trash it. Also, there appears to be a misconception that P plate drivers all have the same experience, and haven't already participated for many years in motorsport.

When I was on my P's I was legally allowed to drive whatever I wanted.

This has probably been more to do with the amount of money I had to spend on cars at those points in my life, rather than through any sensible decisions I have made or through laws forcing me to do it. The only sensible decisions I can really take credit for is probably always doing the braking/handling mods before the power mods.

However, I feel that the way my cars have progressed has meant that the car I am driving has been appropriately matched to my skill and confidence as a driver, and as these have progressed so has my car. I mean, if I had been driving the wedge as she is now when I was first on my P's, I most probably would have killed myself.

I don't think we need to stop P platers from modifying cars, if they want to do brake and handling upgrades why shouldn't they - as long as they do them legally and engineer them properly. And HP mods are OK too, as long as they keep to the power restrictions.

With all that said, more driving training would definitely not hurt either...

/rant

No rant. good contribution. Some P platers are legally racing years before they get their P's. They have even more powerful race cars and are surrounded by people seeing the red mist of racing.

I think its about time this topic was put to rest.

Yes its good to see some car chatter but people need to be reminded that this is a shit talking thread not an information thread.

I would hate to see one of our members attempt to take on a car above their skill limit and end up injuring or worse killing themselves.

Its bad for their family, the community and our reputation when everyone witnesses on the news another import wrapped around a tree.

This is why the hoon laws were introduced.

Mother Duck says remember the 50/50 rule and don't let your ego get in the way.

It's easy to get yourself into a situation but harder to get yourself out of it.

It's a thread of conversations and opinions.

No one has suggested any of this. To be legal and on a road it needs to be inspected and approved by an engineer or inspector and none of us can do this over a forum.

Hoon laws, I know a bit about, as I was in the NSW Attorney General's Criminal Law Review Division at the time they were being drafted. Hoon laws stop errant driving behaviour, not limit car modification. They were a misconceived law and I can assure you the people drafting and approving them do not know the difference between a VN V6 shitbox on bald tyres with clear coat flaking off driven by some Trevor doing a burnout and a neat GTR.

Laws are based on perceptions of what needs to be done to address a problem, they are not always rightly made. I personally have issues with crushing cars for any reason, because I see this as a governmental infringement on peoples' private property possession rights. The Crown wants them they can buy them - I cite buying Indonesian fishing boats as a case in point.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...