Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Got my self a new exhaust today. HKS Priest, hopefully quiets things down a little.

This is what my car has.....very quiet. A bit flatulent at Idle (I'm sure the GTR won't be as bad). and if its anything like mine, front half is 3" rear is 3.5"

 

This is what my car has.....very quiet. A bit flatulent at Idle (I'm sure the GTR won't be as bad). and if its anything like mine, front half is 3" rear is 3.5"

Good to hear it is quiet. Hopefully doesn't cut power too much. It is indeed 3 inch at the front and 3.5 at the back. Weird! You need the higher flow at the front not down the back.
  • Like 1

Good to hear it is quiet. Hopefully doesn't cut power too much. It is indeed 3 inch at the front and 3.5 at the back. Weird! You need the higher flow at the front not down the back.

Add more boost

no it ain't......it's just right.

You sure as heck don't want to bring anymore

unwanted attention to yourself

Dosent seem loud at all, was about to say you've never heard it but you would of heard it after I gave it a boot full on the road up to QR when i left happy laps and at the drag day.

Side note: the ant eater is in for charity cruise right?

although I never got to hear the unicorn on full song......I never really thought it was too loud but sounded nice :)

It is 112db at idle. When sitting at home you can hear it coming for a solid minute before it gets home! Lol. Its just a straight pipe with a cheap cannon on the end so I always needed to do somthing about it. It was always going to cause me to get fisted by the law at some stage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...