Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Torque is something Im not to familiar with in regards to what sized engines should be creating what amount of torque. Understand what it is and how it works just not average each engine makes.

Torque is something Im not to familiar with in regards to what sized engines should be creating what amount of torque. Understand what it is and how it works just not average each engine makes. 

Fair enough. It's pretty confusing and takes a lot of calculation to get the actual engine figure. I am guessing yours works out at 550 to 600nm at the engine.

12 to 16 cars for a track day... Ain't gunna happen in NSW unless your guys are prepared for $450 just to run Wakefield... If going to texi, they don't go for times anymore, they just do burnouts. Its why anyone quick either moved to Qld or stopped going to texi...

Sounds like I'd enjoy this "texi" thing

Fair enough. It's pretty confusing and takes a lot of calculation to get the actual engine figure. I am guessing yours works out at 550 to 600nm at the engine.

Dont rb25's put out around 700nm of torque? wouldnt a 30 make more?

It cant be 2400Nm of torque...

Even at 2000rpm, that's 500kws... Which is more then your peak power.

If youre making 380kw at around 6500rpm, at that point youre making 558nm of torque...

Dont rb25's put out around 700nm of torque? wouldnt a 30 make more?

let's do the calculation. What size wheels and tyres do you run? We need the radius from hub to the tyre. And what diff is in there?

I found this post in the RB30 thread. Very similar setup to mine

Haltech R34 GTT Pro Plugin

Spool 3.4

260 10.8 Procams

6boost & progate 50mm

Precision 6466 1.0AR TS

20psi on Caltex eflex

1_zps59ceb4fc.jpg

Martin you just brought me lulz.... *golf clap*

Also you bastard why u no come for beer on Sunday every one was like "where is Martin" and then mike was like "f**k Martin I hate him and his gay car" ... True story

Martin you just brought me lulz.... *golf clap*

Also you bastard why u no come for beer on Sunday every one was like "where is Martin" and then mike was like "f**k Martin I hate him and his gay car" ... True story

</3 Mike :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...