Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Morning all.....

How to crash the white 31 GTR at lakeside?

That's how I woulda had mine

2 white 32 GTR's that belonged to club members have already met their maker at lakeside.

In one year!

I have bits of one of them on my black car
speaking of which, hopefully I can move,it on next week, which leads on to certain things...

woot, recycling ftw!

Sell gtst spend money on big brake kit for gtr

One needs more power to make the most use of big brake kits...

(yeah, i'm planning power upgrades and i haven't even got my current one finished yet)

Leopard now has a working alternator, yay :). Plus a couple of other enhancements.

Soon to go to Chris to get the TV and bluetooth working. Then.... who wants to buy her? :P

Would much rather spend the money on the 32 then buying another car. Speaking of spending money on cars. Anyone have a copy of fast and can email the break down pictures of the front and rear suspension and both the front and rear subframes?

2 white 32 GTR's that belonged to club members have already met their maker at lakeside.

I have taken mine around lakeside on a couple of occasions abd never had a problem

Would much rather spend the money on the 32 then buying another car. Speaking of spending money on cars. Anyone have a copy of fast and can email the break down pictures of the front and rear suspension and both the front and rear subframes?
let me check for you Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...