Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

You went all the way down to see Matty Spry and didn't swing pass to say hi????

I also went to bed late paying for it now :/

Sorry to hear about your mates car Scottie.

What power did it make before she gave way?

534rwhp through a 3spd auto box on 28psi... Reading doesnt do it justice. Its quicker than my car

Unfortunately, when you do this with old engines, something inevitably goes bang.

Correct, If it didnt break on the dyno. No doubt we would have broke it on the drive home lol

It is what it is

Correct, If it didnt break on the dyno. No doubt we would have broke it on the drive home lol

It is what it is

Not necessarily. It's under strain on the dyno. You could have been fine on the way home and then blown it at QR. Good luck getting back to Bribie form there!

Correct, If it didnt break on the dyno. No doubt we would have broke it on the drive home lol

It is what it is

Not necessarily. It's under strain on the dyno. You could have been fine on the way home and then blown it at QR. Good luck getting back to Bribie form there!

Not necessarily. It's under strain on the dyno. You could have been fine on the way home and then blown it at QR. Good luck getting back to Bribie form there!

He would have given it a full boot on the way home on highway for sure. Loves going fast too much. But yeah either way would have blown last night or at Downshift on Sunday morning. Which wouldnt have been great for me as I have to go to work afterwards on sunday

  • Like 1
He would have given it a full boot on the way home on highway for sure. Loves going fast too much. But yeah either way would have blown last night or at Downshift on Sunday morning. Which wouldnt have been great for me as I have to go to work afterwards on sunday

Lol. Fair enough. At least you have red bull.

Not necessarily. It's under strain on the dyno. You could have been fine on the way home and then blown it at QR. Good luck getting back to Bribie form there!

Cruisung up a long hill in a high gear is also possibly more load than a lap at QR. Also being on the dunno is not inherently strenuous, for power runs the ramp rate is low and it's under very little load! LEAVE DYNOS ALONE *cries*

Morning all, trying to get a half day at work I'm f**ked between doing massive hours, trying to cut and lifting last night I'm f**ked :(

534rwhp through a 3spd auto box on 28psi... Reading doesnt do it justice. Its quicker than my car

Cause auto ;)

(Makes you wonder why I'm not worried about Pete's powwah hehehe)

Morning all, trying to get a half day at work I'm f**ked between doing massive hours, trying to cut and lifting last night I'm f**ked :(

Cause auto ;)

(Makes you wonder why I'm not worried about Pete's powwah hehehe)

Im starting to get tempted in the auto direction and im not sure i like lol

Don't say that, it's ment to be sunshine and lollipops... You trying to discourage me lol

Im not discouraging. Just advising

V... What, V! f**kING WHAT, V!!!

Get out!

Redbull fo life :rant:

I know i feel ashamed of myself. I cant justify $5 for a 355ml can of Redbull.

V was 4 pack of 250L for $7

Morning all, trying to get a half day at work I'm f**ked between doing massive hours, trying to cut and lifting last night I'm f**ked :(

Cause auto ;)

(Makes you wonder why I'm not worried about Pete's powwah hehehe)

If it was from a standing start, instead of a rolling start where every single factor is in your favor, you should be worried about his powah, but I will say one thing for you, you choose your battles well!

If it was from a standing start, instead of a rolling start where every single factor is in your favor, you should be worried about his powah, but I will say one thing for you, you choose your battles well!

Wonder why he tries to line me up then.. Delusional?

Thinking like Nick here, and it is scary, but I imagine he is hoping you will miss a gear, then he will never race you again :P

This actually happened at Downshift last month.. .Missed 3rd so he had me at half track. Got him back by the end though... Damn kids and there Auto V8's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...