Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

what was wrong with the kit Grego?

Gary's recommended kit includes the following:

Front Eibach Main Springs

Rear Eibach Main Springs

Rear Eibach Helper/Tender Springs

Colil Over Conversion Kits x 4

Front Bilstein Shocks

Rear Bilstein Shocks

Front stabiliser bar adj

Rear stabiliser bar adj

Caster Kit

Front Camber kit

Rear Camber Kit

Front Bump Stops

Rear Bump Stops

Rear Subframe alignment kit

I'd like to hear your thoughts Grego as I was just about to get the funds organised for the above?

Shocks, springs, sway bars and bump stops are good. Everything else i would be going adjustable arms (you can get adjustable arms with rubber bushes rather than spherical bearings). The sub frame alignment kit http://www.whiteline.com.au/product_detail4.php?part_number=KCA349 why would he recommend that rather than just replacing the 20 year old bushes?

Also what about the diff mounts, rear lower control arm bushes, bushes in the rear hubs/uprights and more i can't think of now. There are a lot of parts he has left out.

Hey scotty, calipers are upside down afterall

20140318_133204_zpsqzataohd.jpg

Yer, thought it was. Ah well ill switch them over next time they need bleeding.. They still work really well

Also, so much zed, so little shed

20140318_181800_zpstpz87gpd.jpg

Holy Zeds Batman...... I like the fact you've got so much love for one type of car. Any chance we will see one of these at the dyno day this weekend or happy laps??

We should have a party at Mikes and see how much of the backyard we can fill with Zeds and Skyrine. If the Zeds win, we but him a beer. If the Skylines win, we put an RB20 in one of his Zeds. :-D

rb20 might at least give more engine room for other mods. May stop the process of taking the engine out of a zed to do an oil change lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...