Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Speaking of tax dollars, repeal day was yesterday. What are Mr Ants' thoughts on the matter?

About bloody time!

I welcome these amendments in fact I could almost kiss them.

We live in a really wonderful country that offers incredible opportunities to the ones that are searching for it compared to other well developed countries. HOWEVER, the level of bureaucracy in Australia has been on the rise for quite a number of years and not only is it burdensome to us all but has prohibited Australia to become more competitive as well.

Removal of the so called ‘red tape’ is certainly a welcoming measure and will assist businesses carrying on what they do best and that is concentrating on their business operations.

Australia is simply too highly regulated and having the need to have a watchdog for every sector is simply not viable and canning the watchdog for charities is fine by me especially since the ATO has been already been administering these duties already.

The reduction of compliance requirement within the future of financial advice act (FOFA) is a doubled edge sword though……….I know many financial advisers that do the right thing by their clients and do not even accept commissions and as such would benefit from yesterdays reduced regulation, HOWEVER, it is other gung-ho financial advisers that need such regulations in place to keep them in check. I think that other controls should be put introduced like maybe force each financial advisers (of certain size) to establish a risk committee within their organisation to mitigate any potential abuse or self-interest arising and reports from the committee can then be audited / reviewed by ASIC (just an suggestion I thought of as a middle ground)

This is only scratching the surface, more unnecessary regulations need to be removed at Federal level and especially at State government level; take a look at your local councils for example, you need a form for a form to get another form these days, thus only adding to the frustration of us general household consumers to try and do the right thing i.e. could be getting soil testing done, permits, etc….

Much more to be done but this is a good start.

About bloody time!

I welcome these amendments in fact I could almost kiss them.

We live in a really wonderful country that offers incredible opportunities to the ones that are searching for it compared to other well developed countries. HOWEVER, the level of bureaucracy in Australia has been on the rise for quite a number of years and not only is it burdensome to us all but has prohibited Australia to become more competitive as well.

Removal of the so called ‘red tape’ is certainly a welcoming measure and will assist businesses carrying on what they do best and that is concentrating on their business operations.

Australia is simply too highly regulated and having the need to have a watchdog for every sector is simply not viable and canning the watchdog for charities is fine by me especially since the ATO has been already been administering these duties already.

The reduction of compliance requirement within the future of financial advice act (FOFA) is a doubled edge sword though……….I know many financial advisers that do the right thing by their clients and do not even accept commissions and as such would benefit from yesterdays reduced regulation, HOWEVER, it is other gung-ho financial advisers that need such regulations in place to keep them in check. I think that other controls should be put introduced like maybe force each financial advisers (of certain size) to establish a risk committee within their organisation to mitigate any potential abuse or self-interest arising and reports from the committee can then be audited / reviewed by ASIC (just an suggestion I thought of as a middle ground)

This is only scratching the surface, more unnecessary regulations need to be removed at Federal level and especially at State government level; take a look at your local councils for example, you need a form for a form to get another form these days, thus only adding to the frustration of us general household consumers to try and do the right thing i.e. could be getting soil testing done, permits, etc….

Much more to be done but this is a good start.

There's definitely a lot more that needs to be done but it's a great start. The number of people working in government in antiquated divisions is remarkable...

The filter in the RB, while not difficult, could be a lot easier. Magic Mike wins that round

Ls1 oil filter, directly at the bottom with nothing in the way and you don't end up with oil on your block

I hate spark plugs on any rb with a crossover pipe. Again not difficult but well annoying

Spark plugs on an ls1, open bonnet take of lead unscrew put in new plug put on lead close bonnet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
    • And yes with a full tank it will hit limiter free revving or driving 6B6CDF6E-4094-426D-A9CB-6C553475FE36.mp4
×
×
  • Create New...