Jump to content
SAU Community

Diy Calibration For A D90 (Or Any Non Af Fine Tune Capable Camera) Tried And Tested

No Crust Racing

By No Crust Racing,
in Photography

 Share

Recommended Posts

No Crust Racing Grand Master

No Crust Racing

Posted
Posted

Hi guys, just wanting to share this as I found it useful. Short version is I found this link, followed it and had success.

http://buckscorner.com/home/nikon-d90-autofocus-calibration/

Backstory.

I bought my missus a D90 a few years back when it was considered a good camera.

On a holiday we had the camera in the boot of the car (in a decent lowerpro bag) but somehow it got lose of where it was packed and it must have taken a fairly solid knock.

The 18-55mm kit lens then started showing some binding issues on the focus ring and pics out of the camera didn't seem as crisp, I assumed it was the damaged lens and as the other lens was a 70-300 it was hard to test them back to back to confirm.

I recently got jack of struggling with the 18-55 and its lack of low light capability (f3.5 at best) and how it was costing me shots of our new bub. So I bought a 35mm 1.8G DX for it and was disappointed that shots still looked average.

I'd suspected the camera may be at fault too so started doing some reading.

As there's no place locally to calibrate lenses I knew I'd have to send it to Melbourne so thought I might as well have a go myself and if I got it wrong it was already being sent away.

I ran through the focus tests and found it was back focusing noticeably. I made tiny adjustments on the screws as per the article and tried my best to mimic those changes on each of the 3 screws. Took about an hour or so.

My result was quite good, faster focusing and much sharper images. I would say that I think it may not be 100% as I suspect that there's some "soft" focus around the edges (at higher F stops so it's not a DOF issue) so the camera may be calibrated anyway, but in the meantime, until I can get down to Melbourne, I'm much happier with the shots coming out of the camera, as is my partner (which is probably even more important...).

Keep in mind this is only useful for Cameras that dont have AF fine tune adjustments built in, so if you have a D7000 or something you can make adjustments from the config menu and do not need to be fiddling with screws.



CLNSKY Experienced

CLNSKY

Posted
Posted

Great find,

Definitely going to attempt this on my D90, my shots where coming out soft as well. I thought it was time to upgrade cameras...

Maybe a last hurrrah before that happens :D

No Crust Racing Grand Master

No Crust Racing

Posted
  • Author
Posted (edited)

Everything I've read suggest back focus is a common issue on D90s.

Further down in the comments, on guy explains which direction to turn depending on if you've got front or back focus issues.

Even if you do end up with a new camera, a second body could be handy if it's working well :)

Good luck.

Edited by ActionDan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Thanks, will do that.  Thankfully they still feel great.
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • GTSBoy
      Slight brake pedal stutter after new pads

      By GTSBoy · Posted

      It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...