Jump to content
SAU Community

R32 Gtr Nismo 320Km Cluster

GTR KID

By GTR KID,
in Car Detailing & Paint Care

 Share

Recommended Posts

GTR KID Enthusiast

GTR KID

Posted
Posted

hey guys n gals

just bought a 320km cluster and was wondering do they fit all models as I seen a seller on eBay who had a few for sale and stating that a couple where for pre august 1991 and another for 1991 august and after is this true that there are different clusters for different year models??

Link to comment
Share on other sites
Sinista32 Grand Master

Sinista32

Posted
Posted (edited)

Yes there are

Tell tale sign is the colour of the film on the back that carries the electrical circuit

Buff/Tan is pre 92

Bluey is 92 onwards

I actually thought it was August 92 from memory but it could be Aug 91 :wacko:

Edited by Anonymouse
Link to comment
Share on other sites
GTR KID Enthusiast

GTR KID

Posted
  • Author
Posted

Aaahh feck

yeah I seen a couple had the tan and the 91 onwards had the blue and thought that was the difference

Damn it the one I bought is tan aswell

ahwell it can go up for sale

thanks mate much appreciated

Link to comment
Share on other sites
Sinista32 Grand Master

Sinista32

Posted
Posted

your welcome

I have a late 92 R32GTR and bought a whiteface Nismo 320 cluster (blue film)

Way back when I bought it some one made me aware of the differences - happy to pass it on

Before you sell it there is a tutorial on here on how to make it work if you have the wrong one.

You will have to search around though. Try search - Nismo cluster

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chris_Guthrie
      Misfire/stalling issues

      By Chris_Guthrie · Posted

      Any recommendations on a decent replacement manifold that doesnt break the bank or require additional mods for the stock turbo setup? I figure if I'm going to pull the manifold off anyway to fix the studs might as well replace it. 
    • Chris_Guthrie
      Misfire/stalling issues

      By Chris_Guthrie · Posted

      So I checked the turbo out today. Very minimum play at all just enough for the oil to take up when it's running. I did find an exhaust leak at the manifold. 1 stud all the way in the front is missing and the one all the way in the back is broken off. Front has visible signs of an exhaust leak. I'll fix that soon but that's not my problem still.  I also found that the nipple coming off the turbo had the hose capped off and a hose ran from the j-pipe by the bov going to the wastegate. I removed that hose and capped that nipple and put the turbo nipple hose back on the wastegate.  There was a ton of oil residue all through the charge side of the intercooler piping going to the throttle bodg. I'm thinking that's from the pcv. Doesn't seem to be coming from the turbo that was all clean on the pipes side.  Haven't had a chance to check fuel pressure yet, haven't had time been having to pull a lot of doubles at work. I did pick up some carb cleaner to clean the iacv but wanted to make sure I had a fresh gasket in case the old one rips when I pull it off.  I'm waiting on a MAF that was supposed to be here today but delayed to Monday. Have a double Monday and Friday and work all of next weekend so going to try to find some time in the middle of the week to try that out. Did about a 10m trip around the block today and towards the end the issues were coming back. Fingers crossed on this MAF but if not just going to throw a fuel pressure gauge in and see where I'm at.  Did notice today that I can definitely hear the injectors pulsing. Very audible clicking coming from them. Assuming that's normal? Should also mean CAS is functioning somewhat properly. After it warmed up when I started it the intermittent misfires came in again. Did start doing that before it was fully warmed up. 
    • klutched
      GOT SUM's RB34

      By klutched · Posted

      This morning I carefully reinstalled the manifold and started looking at a couple of things I need to do.  Heat wrap arrived sometime today so I popped into the shed with the missus dishwashing gloves and started wrapping the first half of the dump and the screamer/plumb back.  Once I do the second half I'll be able to final fit the turbo and exhaust up.  Also pulled the harness out today and started terminating it at the ECU end. A connector is done, just need to run the remaining wires that arent in the harness - 12v, gnd and couple I/O
    • Dose Pipe Sutututu
      Rear suspension upgrades

      By Dose Pipe Sutututu · Posted

      A31 is pretty much the same thing without HiAIDS I mean CAS, no improvement lol. Not to late to send it.
    • carnoobb
      Newbies

      By carnoobb · Posted

      Thanks for all the replies! I also wanted to ask if wheels that were fitted on Ford Falcons would fit the 350GTs as well? In the area I'm at there aren't that many options for secondhand wheels and new ones here are way out of my budget. From what I've seen, most of the wheels that are available that were fitted on Ford Falcons have an offset of +33 to +36, with a centre bore of 70.5mm whereas the stock 350GT's ones are 66mm, can't seem to find any hubcentric rings that fit that difference though. 
×
×
  • Create New...