Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Finally got the rears fitted today. So glad it all just works. Such a relief!

I'm now going to finalise the order for the motorsport spec bearings (unlike other kits on the market, they will use proper motorsport/aircraft spec bearings which have much tighter tolerances. I have used the highest quality materials in this design so no point skimping there either. Will add a bit more cost but it's well worth it.

dr30-skyline-s13-silvia-rear-strut-top-c

Much more height available now - with the standard S13 rear struts at full extension they were well below normal DR30 ride height. With these you can now get a standard ride height without having to be at full extension meaning the car will ride a heap better.

dr30-skyline-s13-silvia-rear-strut-top-c

dr30-skyline-s13-silvia-rear-strut-top-cdr30-skyline-s13-silvia-rear-strut-top-c

Hey guys,

I have some pricing and these kits are selling now. I am awaiting final delivery of the new bearings and as soon as they arrive I can start shipping. I have a front set sold already already so currently have:

8 fronts left

9 rears

Front and rear kit as a package is $350

Front alone is $220

Rear alone (will also fit R31) is $160

You can purchase via my website www.brysport.com/shop.html

Also have a few more exciting DR30 and FJ20 bits coming...

7 fronts left

8 rears

Just to let you know the bearing hold-up has been sorted but still a couple of weeks away. Still taking orders as they will be shipped as soon as the bearings arrive.

No hold up if you just want rears. Can be purchased through: http://www.brysport.com/shop.html

  • 4 weeks later...

The bearings have finally arrived and they were worth the wait. You will never get a kit like this with these motorsport spec bearings at this price. These spec bearings alone are RRP $180 a pair - just ask anyone who has had to build a race car before and had to spend thousands alone on bearings!

I have a few sets left so please visit the website and make your purchase for the complete kit, front or rear alone.

http://brysport.com/shop.html

  • 3 weeks later...

Hi there, I've just check my inbox and nothing there, please send to [email protected] - or send me a message on here.

As far as fitment on the C210 if the tie-rod-ends are the same ar the R30 then this kit could probably be used with the C210 but I have never seen a C210 front end. Could you send me photos of the tie rod end along with some measurements?

  • 3 months later...
  • 2 months later...
  • 1 year later...

Pics are all dead, I was wondering if these kits would suit a 88 Z31 300ZX. S13 based conversions have been done in the US and as far as I can tell the Skyline suspension setup is similar to the Z31's. Old thread I know, no harm asking though.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...