Jump to content
SAU Community

Recommended Posts

post-65459-0-96578500-1381407394_thumb.jpg550RWHP - 340KW AT ALL 4 R32 GTR selling my R32 GTR very quick car, reliable, and has further potential. the engine was rebuilt by previous owner, with all work done by ADVAN perfomance in sydney, and i have had about $15000 worth of work done at CNJ motorsport in underwood QLD. i have receipts for all of the work i have had done and from the previous owner. mods include. engine - crank balanced and micro polished arp rod bolts rods unknown? trust 8.6:1 compression forged pistons upgraded valve springs trust 272 deg cams trust adjustable cam gears trust 8L sump extension and 26 row oil cooler and relocated oil filter custom catch can alloy radiator full trust T78-33D Turbo kit 6BOOST steampipe manifold trust drag spec 115mm thick intercooler kit trust 4'' drag spec exhaust trust type r blow off valve splitfire coils trust pod filter in custom alloy airbox fuel system consists of a surge tank and twin bosch 044's in the boot with braided hose running to the engine with an alloy rail, sard fuel reg and 880cc seimens deka injectors. battery is an odyssey item located in the boot in a custom alloy holder along with the pumps and surge tank. drivetrain, suspension - custom exedy twin plate 1000hp clutch r33 gtr vspec gearbox TEIN coilovers trust strut tower braces front and rear wheels and brakes - WORK xd9 gunmetal 18x10 +17 NITTO nt05 275/35/18 tires in good condition slotted dba rotors and track spec pads body - garage saurus style fibreglass front lip standard gtr kit everywhere else with the rear wing removed bonnet lifted with washers to let turbo heat blow through paint in pretty good condition with only a few little scratches which have been touched up electrics and interior - Autronic SM3 ecu apexi electronic boost controller 4wd controller a large array of trust guages to keep an eye on engine vitals kenwood head unit 2 sets of pioneer splits and an alpine sub with 2 amps

asking $26000

contact Ben on 0413853519

or email [email protected]

car located in woodburn

northern nsw near Ballina

or hour and a half south of the gold coast

post-65459-0-54102800-1381406142_thumb.jpgpost-65459-0-10568600-1381406153_thumb.jpgpost-65459-0-81701300-1381406166_thumb.jpgpost-65459-0-51334800-1381406198_thumb.jpgpost-65459-0-99439200-1381406231_thumb.jpgpost-65459-0-54570000-1381406315_thumb.jpgpost-65459-0-03238500-1381406367_thumb.jpgpost-65459-0-88254000-1381406377_thumb.jpgpost-65459-0-02986100-1381406395_thumb.jpgpost-65459-0-97990700-1381406412_thumb.jpgpost-65459-0-68561100-1381406427_thumb.jpgpost-65459-0-63984600-1381406441_thumb.jpgpost-65459-0-69492400-1381406469_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 months later...

. Would you be interested in swap for 2005 bf xr6 turbo. Has 320rwkw, 6 speed sports shift auto, clean, has almost 150000km comes with spool rods, cp pistons, arp studs, big actuator. Has a full exhaust, valve springs, injectors, fuel pump, oil feed line, zip kit in gearbox for firmer shifts, DVD player installed but haven't made the appointment for it to be wired up yet, gauges on dash, plazman 800 cooler, hot side cold side pipping, currently running on 13psi. If motor is built (parts supplied) it will handle 1000hp claimed by spool. Vic rego until November

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201449
Share on other sites

it looks in the pics as though the bonnet doesn't sit flush with the guards near the wind-shield?

do you still have the boot spoiler?

do you have a dyno sheet? i'm interested how the trust single setup compare's to -5's or -7's at a similar power level.

Edited by ttoks
Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201469
Share on other sites

it looks in the pics as though the bonnet doesn't sit flush with the guards near the wind-shield?

do you still have the boot spoiler?

do you have a dyno sheet? i'm interested how the trust single setup compare's to -5's or -7's at a similar power level.

bonnet spacers mate for hot air to escape

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201486
Share on other sites

bonnet spacers mate for hot air to escape

hmm, look's retarded, and in the under bonnet pic there doesn't appear to be a spacer on the bonnet hinges, but at least easily changed if that's the case.

Edited by ttoks
Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7201581
Share on other sites

hmm, look's retarded, and in the under bonnet pic there doesn't appear to be a spacer on the bonnet hinges, but at least easily changed if that's the case.

Can actually see the spacers fine mate. You just need to look properly. To me looks like bit of washers used as spacers but can definitely see something there.

Link to comment
https://www.sau.com.au/forums/topic/433149-94-bnr32-gtr/#findComment-7202063
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...