Jump to content
SAU Community

Recommended Posts

Event:
Happy Laps - Lakeside Park

Description:
A chance to get out on track for a fun cruise and have some om nom noms! Bit of spirited driving is allowed but it is still an event on a race track so a few rules need to be followed (see below). Breakfast will be served with bacon, eggs, beans and toast.

Location:
Lakeside Park
Link To Map.

Date:
Sunday 12 January 2014

Time:
7:00 AM Arrival
7:30 AM Breakfast
8:00 AM On Track

Cost:
$35 for members and guests of members riding/driving the members car.

$50 for non members.
Please note that this is a per person cost, any passengers are required to pay as well.
If you wish to come along to watch and not have breakfast it is free.

Requirements:
1. Participants must meet minimum age requirements for being on track. Minimum age: 12yrs old.
2. No overtaking in the first 2 laps.
3. The overtaking car is responsible for completing the overtaking move safely.
4. Overtaking is only permitted on straights, unless clearly waved passed by the car in front.
5. Overtaking move must be completed well before the end of the straight, and the car being overtaken must be given plenty of room.
6. Cars should not be more than 2 abreast at any point on the track.
7. Be aware of cars around you, in front and behind (and beside when being overtaken).
8. Do not assume that the car in front of you knows you are there.
9. Please pay cash on the day, no EFTPOS is available.
Lakeside Specific Rules:
10. Members must have completed at least ONE QR Happy Laps before participating in a Lakeside session. (If you have done other Lakeside events before you may be eligible. PM me to clarify)
11. No overtaking or cars side by side on the kink.

Payment Details:

Name: Skylines Australia Queensland Club

Bank: Westpac

BSB: 034 063

ACC: 354012

PAYMENT REFERENCE: Username&HappyLaps

Attendees:

1. Cadmoon

2. t5iv

3. HiveFleetAbyss

4. cowdy

5. Cyifly

6. AndrewK34 +1

7. Bodo

8. Shi Pi

9. gts032

10. Kiwi_Phil

11. Kiwi_Phil's +1

12. ARE31 +1

13. B-Boi34 +1

14. Bubbles

15. Bubbles' +1

16. Bubbles' +2

17. Tohmez

18. Smity42 +1

19. Wolfman101

20. Ralph

21. courtoR33 +1

Link to comment
https://www.sau.com.au/forums/topic/434078-lakeside-happy-laps-120114/
Share on other sites

Since QR now require a minimum of 30 people (drivers and passengers) per session we will see how this LP session goes, if we get enough people we will be able to keep the price at $35 but if we cant get numbers we will have to bump the prices to cover the numbers.

if everyone that says they will turn up,actually turned up there would be no problems,if you cant go just say so,makes it hard enough for the club to organise these events as it is,let alone being shagged around,this is for you people!!!!

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
×
×
  • Create New...