Jump to content
SAU Community

Recommended Posts

Hi All,

Below a list of all stuff that was extracted out my 1999 R34 GT-R V-Spec as it got modified:

Motor/Driveline:
==========
- Complete R34 GT-R twin turbo setup (includes turbos x 2, housing x 2, manifold & turbo dump x 2, actuators x 2, lines, hoses, flanges, screws, bolts, nuts) $600
- Standard R34 GT-R 'Nismo' Intercooler x 2 $120 each
- Standard R34 GT-R Ecu (plug and play) - R34 GT-R Exclusive I think (could be wrong) - expressions of interest
- ARC (very rare and 'classy' brand) Enclosed Pod Filter with AFM's and Induction Pipe(s) - includes the Genuine twin turbo pipe $600
- Standard twin BOV's with mounting pipe $195
- JASMA approved FULL exhaust setup (includes Genuine Trust Front Pipe mounted on), catless then tip (can get you the specs of the exhaust, eg: input/output inch's) $960

- Genuine R34 GT-R water pump $80
- Genuine R34 GT-R radiator $195
- Genuine standard R34 GT-R (can be used on other GT'R's): IN and EX Camshafts $250 set
- Genuine standard R34 GT-R (can be used on other GT'R's): IN and EX Cam gears $150 set
- Standard R34 GT-R fuel rail with standard regulator $130
- Standard R34 GT-R injectors (x 6) and supporting lines/adapters $100
- Genuine RB26 Red Top Cam Gear/Timing Belt Cover $70
- Standard R34 GT-R Front Pipe (twin setup) $165

Suspension/Exterior:
==============
- Standard/Genuine R34 GT-R V-Spec, front (x2) and rear (x2) coilovers $450 set

All parts in working condition.

Contact Faiz on 0422 726 309. Flexible with prices depending on the mood :)
Thanks.

  • 3 months later...

Hi All,

Below a list of all stuff that was extracted out my 1999 R34 GT-R V-Spec as it got modified:

REVISED

Motor/Driveline:
==========
- Complete R34 GT-R twin turbo setup (includes turbos x 2, housing x 2, manifold & turbo dump x 2, actuators x 2, lines, hoses, flanges, screws, bolts, nuts)$600
- Standard R34 GT-R 'Nismo' Intercooler x 2
(I/C with temp sensor $200; I/C without temp sensor $170)

- Standard R34 GT-R Ecu (plug and play) - R34 GT-R Exclusive I think (could be wrong) - expressions of interest
- ARC (very rare and 'classy' brand) Enclosed Pod Filter with AFM's and Induction Pipe(s) - includes the Genuine twin turbo pipe $600
- Standard twin BOV's with mounting pipe $195
- JASMA approved FULL exhaust setup (includes Genuine Trust Front Pipe mounted on), catless then tip (can get you the specs of the exhaust, eg: input/output inch's) $960

- Genuine R34 GT-R water pump $80
- Genuine R34 GT-R radiator $195
SOLD
- Genuine standard R34 GT-R (can be used on other GT'R's): IN and EX Camshafts $250 set
- Genuine standard R34 GT-R (can be used on other GT'R's): IN and EX Cam gears $150 set
- Standard R34 GT-R fuel rail with standard regulator $130
- Standard R34 GT-R injectors (x 6) and supporting lines/adapters $140
- Genuine RB26 Red Top Cam Gear/Timing Belt Cover $70
SOLD
- Standard R34 GT-R Front Pipe (twin setup) $165

Suspension/Exterior:
==============
- Standard/Genuine R34 GT-R V-Spec, front (x2) and rear (x2) coilovers $450 set

All parts in working condition.

Contact Faiz on 0422 726 309. Flexible with prices depending on the mood :)
Thanks.

Hey bud.
It is not a Z-Tune Factory "NISMO" Intercooler.
It is a factory 1999.3 BNR34 V-Spec Intercooler with no writing on it.
A quick pic attached below.

post-37577-0-03078000-1393226213_thumb.jpg

Edited by fujin
  • 3 weeks later...

REVISED

Motor/Driveline:
==========
- Complete R34 GT-R twin turbo setup (includes turbos x 2, housing x 2, manifold & turbo dump x 2, actuators x 2, lines, hoses, flanges, screws, bolts, nuts)$600
- Standard R34 GT-R 'Nismo' Intercooler x 2
(I/C with temp sensor $200; I/C without temp sensor $170
SOLD)

- Standard R34 GT-R Ecu (plug and play) - R34 GT-R Exclusive I think (could be wrong) - expressions of interest
- ARC (very rare and 'classy' brand) Enclosed Rectangle 'Box' Pod Filter with AFM's and Induction Pipe(s) - includes the Genuine twin turbo pipe $600
- Standard twin BOV's with mounting pipe $195
- JASMA approved FULL exhaust setup (includes Genuine Trust Front Pipe mounted on), catless then tip (can get you the specs of the exhaust, eg: input/output inch's) $960

- Genuine R34 GT-R water pump $80 SOLD
- Genuine R34 GT-R radiator $195 SOLD
- Genuine standard R34 GT-R (can be used on other GT'R's): IN and EX Camshafts $250 set
- Genuine standard R34 GT-R (can be used on other GT'R's): IN and EX Cam gears $150 set
- Standard R34 GT-R fuel rail with standard regulator $130
- Standard R34 GT-R injectors (x 6) and supporting lines/adapters $150
(The injectors are currently mounted on the standard fuel rail, so $280 combined)

- Genuine RB26 Red Top Cam Gear/Timing Belt Cover $70
SOLD
- Standard R34 GT-R Front Pipe (twin setup) $165

Suspension/Exterior:
==============
- Standard/Genuine R34 GT-R V-Spec, front (x2) and rear (x2) coilovers $450 set

All parts in working condition.

Contact Faiz on 0422 726 309. Flexible with prices depending on the mood :)
Thanks.

  • 3 months later...

REVISED (as at July 2014)

Motor/Driveline:
==========
- Complete R34 GT-R twin turbo setup (includes turbos x 2, housing x 2, manifold & turbo dump x 2, actuators x 2, lines, hoses, flanges, screws, bolts, nuts)$600
- Standard R34 GT-R Intercooler
$200 PENDING PAYMENT

- Standard R34 GT-R Ecu (plug and play) - R34 GT-R Exclusive I think (could be wrong) - expressions of interest
- ARC (very rare and 'classy' brand) Enclosed Pod Filter with AFM's and Induction Pipe(s) - includes the Genuine twin turbo pipe $600
- Standard twin BOV's with mounting pipe $195
- JASMA approved FULL exhaust setup (includes Genuine Trust Front Pipe mounted on), catless then tip (can get you the specs of the exhaust, eg: input/output inch's) $960

- Genuine R34 GT-R water pump $80
SOLD
- Genuine R34 GT-R radiator $195 SOLD
- Genuine standard R34 GT-R (can be used on other GT'R's): IN and EX Camshafts $250 set
- Genuine standard R34 GT-R (can be used on other GT'R's): IN and EX Cam gears $150 set
- Standard R34 GT-R fuel rail with standard regulator $130
- Standard R34 GT-R injectors (x 6) and supporting lines/adapters $140
- Genuine RB26 Red Top Cam Gear/Timing Belt Cover $70
SOLD
- Standard R34 GT-R Front Pipe (twin setup) $165

Suspension/Exterior:
==============
- Standard/Genuine R34 GT-R V-Spec, front (x2) and rear (x2) coilovers $450 set

All parts in working condition.

Contact Faiz on 0422 726 309. Flexible with prices depending on the mood :)
Thanks.

Interested in the exhaust if its 3.5 inches.

if you could get a pic of it that would help.

thanks

Hey bud,

My old exhaust setup was sitting at the workshop, let me find out about its whereabouts.

It was 2.75inch (twin turbo frontpipe TRUST) to 3/3.5inch catback.

Happen to have exhaust temp sensor by any chance?

No bud, I am currently using the exhaust temp sensor on my current manifold/exhaust setup.

Latest Pic's of the Standard BNR34 (V-Spec) FMIC for Sale:
A few array of fins are evidently curved/bent (on the front face of the FMIC), but this very FMIC was able to safely hold 400kwatw.

post-37577-0-67667600-1405932707_thumb.jpg

post-37577-0-29460300-1405932732_thumb.jpg

keen on the exhaust, any pics available?

My old exhaust setup is sitting at the workshop, let me locate it and post the details accordingly.

Thanks.

Edited by fujin

Guys, an update on the exhaust setup.
It's nowhere to be found which means its been sold or given away previously.
Sorry for the suspense.
Thanks.

REVISED (as at 25 July 2014)

Motor/Driveline:
==========
- Complete R34 GT-R twin turbo setup (includes turbos x 2, housing x 2, manifold & turbo dump x 2, actuators x 2, lines, hoses, flanges, screws, bolts, nuts)$600
- Standard R34 GT-R Intercooler
$200 PENDING PAYMENT

- Standard R34 GT-R Ecu (plug and play) - R34 GT-R Exclusive I think (could be wrong) - expressions of interest
- ARC (very rare and 'classy' brand) Enclosed Pod Filter with AFM's and Induction Pipe(s) - includes the Genuine twin turbo pipe $600
- Standard twin BOV's with mounting pipe $195
- JASMA approved FULL exhaust setup (includes Genuine Trust Front Pipe mounted on), catless then tip (can get you the specs of the exhaust, eg: input/output inch's) $960
SOLD

- Genuine R34 GT-R water pump $80 SOLD
- Genuine R34 GT-R radiator $195 SOLD
- Genuine standard R34 GT-R (can be used on other GT'R's): IN and EX Camshafts $250 set
- Genuine standard R34 GT-R (can be used on other GT'R's): IN and EX Cam gears $150 set
- Standard R34 GT-R fuel rail with standard regulator $130
- Standard R34 GT-R injectors (x 6) and supporting lines/adapters $140
- Genuine RB26 Red Top Cam Gear/Timing Belt Cover $70
SOLD
- Standard R34 GT-R Front Pipe (twin setup) $165

Suspension/Exterior:
==============
- Standard/Genuine R34 GT-R V-Spec, front (x2) and rear (x2) coilovers $450 set

All parts in working condition.

Contact Faiz on 0422 726 309. Flexible with prices depending on the mood :)
Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...