Jump to content
SAU Community

Recommended Posts

Hey my mate got an r32 gtst the other day and we are Having trouble with the Parker lights, the Parker lights come on when key is turned on accessories and does not come on when you turn the switch on, I had a look behind the dash cluster to see any sign that it was tampered with but all seems normal, its not switch because with out the dash cluster plugged in and surround with the switch not plugged in it still happens, however the plug that plugs into the park lights and drive lights looks to be a slightly melted and black on two plugs as if there is a short somewhere. note that it is not blowing fuses Opinions?

Link to comment
https://www.sau.com.au/forums/topic/434307-r32-parker-lights-on-when-key-on/
Share on other sites

When you refer to "parker lights", are you including the rear park lights, front park lights and dash lights all coming on? and then all going off when the switch turned on?

Sounds like a earthing problem.. Do the low beam and high beam all work correctly? What happens when the key is out of the ignition and you try turn the park lights on?

Yes when the key is turned to accessories the dash lights come on Parker lights front and back and that beeping sound, and when key is off it all turns off, when key off an you turn Parker's on from the switch there's nothing turn the switch again and driving lights come on

Because of the low current draw on the park light circuit, a short can light up the parks tails and dash quite easily.

I would try an isolation test. I am not sure how the lights are wired but - have the key on and the park light switch off.

I would start in the engine bay - find the plug nearest to the drivers side parkers and unplug it. What happens? Plug it back in and try the passenger side. What happens? Now try both the tail lights one side at a time, noting what happens then plug them back in to try the other side (should be behind the material in the boot) If no plugs are found, remove the globes instead (careful - hot)

When you turn the switch on for park lights, do they glow slightly brighter?

Voncina I tried what you said and nothing also the driver headlight is not working have changed the globe still nothing got a test light on it and no power to the plug but when I pull the stalk it had power, I had a similar problem with mine but ended up being I had to change the dash cluster and it fixed up but I also had no rpm signal and temp gauge so can't be that I'm thinking the old owner hooked the turbo timer and or electronic boost gauge up wrong causing a short maybe? We have traced the loom back all seems fine and there is power at the fuse box also

I highly doubt that if something like an ebc or turbo timer is wired incorrectly in the dash would somehow affect only the drivers side headlight.

If you have tested at the stalk and are getting power there, and none at the light, chase the harness back from the light, checking for any wear on plugs, harnesses - where they go through grommets are usual bad spots. If the passenger side is working, and the drivers is not - find where the harness T's off for the passenger side/drivers side and the fault will most likely be between the T and the faulty light.

Hope I am helping.

Update, I pulled turbo timer out and electronic boost gauge and head unit out to find the Parker light problem, the boost gauges power source was coming from the headunit as there is a Parker wire (blue/red) witch is ilumination for factory headunit and they had tapped into this causing the Parker's to have power when the key is in on position, however I still have the driver side headlight not working

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
×
×
  • Create New...