Jump to content
SAU Community

Bride \ Recaro "replica" Seats Carbon , Kevlar Etc


Recommended Posts

Is it possible to get 1 seat instead of a pair?

(please quote me as I get lost on SAU and forget to check threads haha).

Bride Low Max Gias Sport Style -


Bride Low Max Gias -



what's the difference??



is there an extra charge for the graded bride fabric ?



price check on rails to suit car?


Longz : 4 Pairs Bridge Stradia II Venus , 2 Pairs Stradia 2 Kevlar

occxlr8ed : 3 Pairs of Bride Stradia II Venus

ADUBZ : Bride low Max Gias 2 Sport Style - Kevlar Black \ Graduation fabric

R32GOJIRA : Bride Low Max Maxis III - Kevlar, Red graduation fabric

YE34OK : Bride cuga's with graduation

RandomGuy : Recaro RSG

Hadouken : Yeah should fit genuine rail's , I plan on buying the genuine rail with my seats.

I will find out if the rails are high and low email sent to supplier.

Longz : 4 Pairs Bridge Stradia II Venus , 2 Pairs Stradia 2 Kevlar

occxlr8ed : 3 Pairs of Bride Stradia II Venus

ADUBZ : Bride low Max Gias 2 Sport Style - Kevlar Black \ Graduation fabric

R32GOJIRA : Bride Low Max Maxis III - Kevlar, Red graduation fabric

YE34OK : Bride cuga's with graduation

RandomGuy : Recaro RSG

CH0SON : GT3 Seats red

Hi Longz,

Could you please PM (and / or post) a picture of these for me if possible.

GTR Style Frp,Suede Leather
+Plain Cloth $650
GTR Style carbon,Suede Leather
+Plain Cloth $650.00

Also is it possible to do any of the brides in black leather / suede.

Thanks mate :)

Jeremy

open till feb hey? will have a think. need to plan that budget.

and are there any seats with a lever reclining mechanism rather than a turning knob thing?

Edited by xALmoN
  • Like 1

can I get a price on one seat

Im after the Bride Low Max Gias Sport Style

with black/grey graduation fabric just like the one in the picture in original post.

cheers Jason

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...