Jump to content
SAU Community

Brand New Garret Gtx3076 Twin Scroll

Aggroman
 Share

Recommended Posts

Aggroman Grand Master

Aggroman

Posted
Posted

Hey all,

Up for sale is my brand new Dual Ball bearing GTX3076r (A/R .60) with a Garrett twin scroll .82 v band rear housing.

specs are as follows: Inducer 57mm, exducer 76.2mm. Surge ported front housing with 4 inch inlet to 2.5 inch outlet Rated to 630HP

Bought this with the intention of sticking it on my 34 but have decided to go something a bit bigger so here she is up for sale.

Has been stored in its box with all holes covered for about 6 months. Will send it via registered post or you can come pick it up in Western Suburbs of Sydney

Contact via PM to get phone number if PM's arent you're thing. If you wish to do it via paypal money request I can also do that BUT it will incur an extra 5% due to fees

tell us the price son!?! this thing short of a good hookup with the housing will set you back $1800 but im letting it go for $1500 so not bad for brand new if you ask me!

here are the pics showing how new she is, taken on a HTC phone so dont shoot me!

JFBhn8X.jpg

kTn4Bdu.jpg

uMjXmib.jpg

tHF91bW.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...