Jump to content
SAU Community

Recommended Posts

Hi all, I have an RB25det with Garrett 3076 running 14psi. Currently on standard manifolds and unopened motor. Basically wondering what would be next step for more power, have been told cam gears and 21psi wastegate spring then a suitable tune, what's everyone's opinions? Also I'm currently not sure what supporting mods the car has (I bought it the way it is mechanically) in terms of injectors, afm, coilpacks, fuel pump etc. so some advice on what supporting fuel and spark upgrades are needed would be great and/or what it more than likely has.

Link to comment
https://www.sau.com.au/forums/topic/434992-rb25-more-power-where-to-next/
Share on other sites

The potential here is huge but it sounds like you don't know very much about the set up. Is it externally gated?

I'd be talking to a tuner. find out what injectors you have and pull out the fuel pump to see what you've got there too. ECU? What colour are your coilpacks? we can likely tell you which ones they are

If you could go E85 you can make serious power on a 3076 + stock RB25det.

but seriously take it to a tuna if you don't know much about it

The potential here is huge but it sounds like you don't know very much about the set up. Is it externally gated?

I'd be talking to a tuner. find out what injectors you have and pull out the fuel pump to see what you've got there too. ECU? What colour are your coilpacks? we can likely tell you which ones they are

If you could go E85 you can make serious power on a 3076 + stock RB25det.

but seriously take it to a tuna if you don't know much about it

Internally gated, black coilpacks, apexi fc.

the coilpacks are probably nissan. 14 psi is low boost for that turbo there is a lot more power in it on pump 98. I don't know where you got 21psi from but you could run an EBC and with a tuner could turn up boost provided your fuel system keeps up. Could you post a picture of the injectors? sounds like they are probably standard which will max out around 250rwkw-ish on that turbo, don't quote me on that (maybe someone else can butt in here).

If you don't mind travelling to North Ryde, Toshi does a great job of tuning at a decent price and he is very safe.

he's on the forum here or you can look him up on FB

It's got an eboost 2, I think the pint was more that if I want more boost I need to change the waste gate spring. I'll see if I can get a pic tomorrow morning n post it up. Haven't heard of toshi before, does he have a shop, or?

bring to tuner, up boost, tidy up tune, fry tyres..

Tuner will then tell you if:

- you need new injectors

- you need new fuel pump

cam gears, cams probably not needed.. many guys on SAU fry tyres with 300kW+ on 98 with stock cams & stock cam gears.

bring to tuner, up boost, tidy up tune, fry tyres..

Tuner will then tell you if:

- you need new injectors

- you need new fuel pump

cam gears, cams probably not needed.. many guys on SAU fry tyres with 300kW+ on 98 with stock cams & stock cam gears.

Cool sounds good. What ballpark figure is tune going for these days?

Cool sounds good. What ballpark figure is tune going for these days?

depends where you go, most tuners like to charge for a full tune (even though they don't do it)

Will I need to change fuel lines and fuel rail for E85 or just injectors and pump?

I would say so, but I have a few friends that run jungle juice in their EVOs and are using stock fuel lines. Injectors & pump if you need to, if there's enough supply save your money for beer.

E85 460L/h Walbro pumps by Ti Automotive can be had for $200 ish delivered, Tuff performance had a pretty cheap sale not long ago.

Definitely going to need to do more research in regards to what's required, not sure if I'll need a surge tank (and of course the extra pump to go with it), should also ditch the special for an ECU that can take flex sensor, seems things are starting to add up pretty quick. Got a budget of around $1000, not thinking that will be close lol.

Are you tracking the car? If not, you don't need a surge tank. And a single intank Walbro 460 will do the job.

But I don't think your budget is big enough to convert to E85, especially if you don't have big enough injectors. You'd be better off doing the wastegate spring and upping the boost. Maybe if you find out your injectors are a bit small then you can stretch the budget a little and see if you can get some ID1000's, then you'll be almost set to go to E85 when you get some more cash.

Edited by Hanaldo

Yea pretty much what I was thinking

just to make it worth it, get to the shop and quickly delete your existing tune so they have to tune it from scratch-ish (probbaly have other maps they can use from other cars and touch up)

but for what it is worth lol

just to make it worth it, get to the shop and quickly delete your existing tune so they have to tune it from scratch-ish (probbaly have other maps they can use from other cars and touch up)

but for what it is worth lol

Lol

Want to get into some drift days, so probably should

Keep the tank full, you'll be sweet :thumbsup:

I don't see the point in a surge tank unless the car is mainly used for track. If you're just doing the occasional track day then I don't believe they are necessary.

I find the skyline tanks pretty good in design, I drove my car around Wakefield into the last 1/4 and no fuelling issues at all.. mind you, it's still a stock piece of shit but you get the idea.

Hi all, I have an RB25det with Garrett 3076 running 14psi. Currently on standard manifolds and unopened motor. Basically wondering what would be next step for more power, have been told cam gears and 21psi wastegate spring then a suitable tune, what's everyone's opinions? Also I'm currently not sure what supporting mods the car has (I bought it the way it is mechanically) in terms of injectors, afm, coilpacks, fuel pump etc. so some advice on what supporting fuel and spark upgrades are needed would be great and/or what it more than likely has.

Z32 AFM or R35 GTR AFM , 550 or 740cc nismo injector if 98 octane fuel , boost controller HKS EVC or Blitz dual solenoid , bigger fuel pump.

Stock engine 17psi max for safe , 0.8m gap spark plugs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...