Jump to content
SAU Community

Recommended Posts

Its an 97 r33 gts-4 which is 4 stud, meaning its really hard to find good rims.... so far.

I found some decent looking rims imo, but the problem is im not sure theyll fit, im thinking they wont, but wouldnt hurt to ask.

http://www.gumtree.com.au/s-ad/cranbourne-west/wheels-tyres-rims/20-inch-mags/1031407023

Personally id prefer 18 inch rims but they are kinda difficult to find.

My car at the moment isnt lowered, its up high as hell i can prob fit my dog in the gap lol, if that helps.

Link to comment
https://www.sau.com.au/forums/topic/435087-will-these-fit-my-skyline/
Share on other sites

After reading some very old threads ive seen people have had problems fitting 20inch in there r33, so im not going to take the risk and adjust stuff just to fit them in unless its possible i guess...

Anyone seen any rims for sale that you think would look good on an r33? Id want atleast 18 inch, probably willing to go 19 inch max unless 20 fits, but mostly want 18.

Whatever you think looks good, also has to be 4 stud or multi stud? Please post if you see anything!

Yes ive looked all over ebay,gumtree tyre stores etc, im not really sure what to put on this car, seeing as you guys are experts with these kind of cars, i figured youd have more knowledge and know what looks best on these cars.

thanks.

Edited by Gw2

Yeah, not going to get 20s, rims arnt really the best either but being a 4 stud, not that much of a selection.

I found these which i think look pretty good, they come in silver aswell

http://www.ebay.com.au/itm/18-KOYA-DRIFT-TEK-BLACK-WHEEL-FIT-SILVIA-S13-S14-S15-SUPRA-200SX-AE86-ETC/271268899304?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D261%26meid%3D2761352705554630945%26pid%3D100005%26prg%3D1088%26rk%3D1%26rkt%3D5%26sd%3D270881094056%26

Ive seen another skyline same colour (silver) but a series 1 have them, they looked pretty good. What do you guys think, would they look good on a r33? If so black or silver?

Its just the stock silver colour they came with. I think im probably going to get those rims, but im also interested in some deep dish with silver lining, i saw one with them and they look sick, just cant find any 4 stud of them so right now im most likely to get those drift teks. I think ill try look for some 2nd hand ones or anything that looks really similar as them, if i cant find any then ill just go down to a shop i know which has them. What would you guys do first, lower your car or fit the rims on them first? Dont really have enough for both at the moment, until my other car gets sold anyway.

Also how much do you think i would get for the rims that are on currently? Once i buy new rims i wont have any use for them.

From what i know, these are called osaka fusion rims. there 17inch multi stud pattern with potenza tyres i think.

http://img844.imageshack.us/img844/3062/41wd.jpg

What do you think would be a fair price for these when i put them on ebay, they are pretty much in perfect condition not a single scratch,mark,rust or anything, i think whoever put them on the car must of put them on really recently. (i bought the car a few weeks ago)

Edited by Gw2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...