Jump to content
SAU Community

Recommended Posts

Ok, much talk about 'tech/mech' stuff, I enjoy that but I'd really like to know where to head if I want to hit the road for a day or two, I'm looking for you're best road trips .. I cant find any threads on this so I hope it helps out others as well and if there's enough interest this can be a work in progress, i.e. if some goes for a drive and enjoys it give us an update and let us know, there are lots of weekends/long weekends and we need to enjoy them and enjoy our cars.

Looking for 1 to 3 day drives, such as a weekend or a long weekend, obviously the usual country and mountain roads which we all enjoy but also good places to stay and good places to stop for coffee, food or photos etc.

With some breaks coming up over the Christmas period, combined with some work about to be done on my car, I'm looking forward to getting into my car and getting a few road trips in .... any suggestions greatly appreciated and I hope this may inspire others to hit the road and enjoy our Skylines.

Safe driving everyone :thumbsup:

Edited by THE34T
Link to comment
https://www.sau.com.au/forums/topic/435403-best-drives-1-to-3-days/
Share on other sites

Down to Melbourne and then onto tassie for a day and back again can be done over 2-3 days.

It is a trip I have not done in a while but one I really enjoyed. Lot's of awesome stuff crammed onto that little island.

Is Truth. :D

A few years back a mate and I went up to Byron Bay for a couple of weeks in my U13 Bluebird. He Navigated? and I did all the Driving.

2 days up and 2 back staying in Tamworth and Gunnedah. The inland road was Very cool with lots of wide open Country to see. Great Drive.

Yep .... I've done that drive via the Putty Road, one of my Fav roads.

Most years I travel to the Gold Coast via the inland roads and spend a week at the Gold Coast then drive back to ACT on the Coast Rd. I love that trip esep the Putty Road thing via Jerrys Plains, front inside wheel off the ground stuff .... nice road.

Yep a great drive

If you go south, go via Caan river, you end up in Gippsland on the way to Phillip island, Bells beach, Wilsons prom etc

Or over Dead Horse Gap above Thredbo, lovely roads both ways.

Just follow the bikes

Edited by D.I.Y. Mik

Ok ... here's one,

I've done this a couple of times, headed to Bight in the Southern Alpine region, winter was great with log fires and red wine etc. It's the usual boring drive from ACT to Albury along the freeway but take the first turn off and it's a great drive. At Albury take the first Wodonga and Yakandandah turn off to the left, amazing country roads through some spectacular scenary into Myrtleford and then into Bright.

Bright is a great little village at the foot of the Vic Alipne region (from here head up to Mt Hotham) and there are plenty of drives up and over mountains (depends on time of year) some very nice day tips. I stayed at the Merrimeet Cottages at Bright, nice place.

http://www.merrimeetcottages.com.au/

This is an ideal 3 day trip, drive down (5 hours) ... stay 2 nights and drive back on the third day.

I've driven around Australia. Not many to mention (I hate driving long distance haha) however, Victoria was very nice - green lush grass either side - cold night driving, nice roads.

Great Ocean road was good - didn't really feel like 50km/h though.

I have driven up to Mt.Kosciusko, very decent drive (MASSIVE LAKE in the middle which was nice) as well as mountain roads.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...