Jump to content
SAU Community

Recommended Posts

RB26 Parts For Sale off my R32 GTR.


Selling All parts cause i have upgraded to a bigger setup, priced cheap to sell.


1) Twin Blitz Blow off Valves with Rb26 Piping, ready to replace stock BOV's and put on, They a pretty loud but i needed more flow :) $300


2) Greddy (copy) turbo and Hotpipe piping Kit for RB26. They have been painted black, but under that is polished alloy if you wanted to remove. Comes with 2 x K&N Pod Filters which are basically brand new. Also included is a Custom made Airbox to suit this setup which is painted black as well. Includes Piping to Both Turbo's (There is no AFM's included) Piping out of each turbo to under the sil. All Silicon Joiners etc included $450 ready to bolt on.


3) Sard 800cc RB26 Injectors, I was running 361kw through them no problem, have since changed to e85 so needed 2000cc ones. $300


4) Rb26 2.5" split dump into 3" front pipes. Turbo to cat. flows well. i was making 361kw with this exhaust setup. $250


5) R32 GTR Stock Intercooler $150.


All items Located Central West NSW. but i will bring to Newcastle in the next couple of weeks so items will be newcastle soon.


Other Pics can be sent on request.


Can arrange shipping at buyers expense, also happy to do paypal if requested so transaction is insured on both ends :)


Cheers

post-98329-0-09456800-1385350001_thumb.jpg

post-98329-0-20572000-1385350023_thumb.jpg

post-98329-0-87083000-1385350117_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/435481-rb26-r32-gtr-parts/
Share on other sites

4) Rb26 2.5" split dump into 3" front pipes. Turbo to cat. flows well. i was making 361kw with this exhaust setup. $250


Any more details/pics on these? Were they custom or off the shelf?


Any idea of postage to Adelaide?


Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...