Jump to content
SAU Community

V36 Bluetooth Music Streaming And Ios 7 - Iphone 5 - Stopped Working?

Haxorz

By Haxorz,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

Haxorz Rising Star

Haxorz

Posted
Posted

Hey guys,

This feature seems to have stopped working since I got an iPhone 5 running iOS 7.

My iPhone 4S worked brilliantly with iOS 6, I can't remember if I was using with iOS 7 or not though. It's a BRILLIANT feature by the way, streaming Kiss FM via the app, music, etc.

I can still make calls and use Siri via the system, but I can't play any music from any app. I get some kind of 'Bluetooth error' on the screen and cannot select play/stop/next etc all greyed out.

Does anyone have this working?

To my knowledge I've deleted the old phone and setup the new one correctly.

Haxorz.

-NismoR32- Rising Star

-NismoR32-

Posted
Posted

Hey guys,

This feature seems to have stopped working since I got an iPhone 5 running iOS 7.

My iPhone 4S worked brilliantly with iOS 6, I can't remember if I was using with iOS 7 or not though. It's a BRILLIANT feature by the way, streaming Kiss FM via the app, music, etc.

I can still make calls and use Siri via the system, but I can't play any music from any app. I get some kind of 'Bluetooth error' on the screen and cannot select play/stop/next etc all greyed out.

Does anyone have this working?

To my knowledge I've deleted the old phone and setup the new one correctly.

Haxorz.

You need to pair the phone again (in car settings for Phone and streaming audio, 2 different options) . delete old in both phone and streaming and pair up again. Should work.

  • Like 1
  • 2 weeks later...
ahxching Contributor

ahxching

Posted
Posted

i also tried adding my bluetooth to play music, everything works but the sound doesnt come out, I have a note 2, i paired friends sony xperia and works fine but it keep going fast and slow, seems like the bluetooth needs updating on the car or something?

  • 2 weeks later...
Haxorz Rising Star

Haxorz

Posted
  • Author
Posted

You need to pair the phone again (in car settings for Phone and streaming audio, 2 different options) . delete old in both phone and streaming and pair up again. Should work.

Excellent! Yes, I have just read something similar online about these two separate options. I will give it a go tonight. I assume it's somewhere under 'Audio > Bluetooth Audio Setup' (according to the v36 translation PDF in the sticky.

Any other hints as to where this is located?

Haxorz Rising Star

Haxorz

Posted
  • Author
Posted

Good news, got it working. Thanks NismoR32!

You do have to go into Audio > Bluetooth Setup > (then some other menu that lists all the paired devices with an 'on/off' toggle next to 'Haxorz iPhone 5' and turn it to 'on'.

Soooo good to have this back!!!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...