Jump to content
SAU Community

Recommended Posts

Well where to start, I have come to the hard decision to sell my most prized possession due to a change in work comitments that will see me driving 600+ KM a week. This car has been nothing than an absolute pleasure to drive and own. I have never once had an issue with this magnificent machine and it turns heads everywhere. Car has recently had a service, new tyres and a upper engine/fuel system clean. This is a very well known car and anyone can vouch for how clean and well looked after it is. Makes 250kw have dyno sheet to prove.

Happy to negotiate freight for interstate buyers :)
Spotters fee on offer :)

$23,990

Current mod list I am sure I have forgotten a few things.

ENGINE & PERFORMANCE:
OEM EVO VII Turbo with EVO VI 10.5 rear housing
ID1000 injectors
X3E motorsport S/S twin dump & front pipe
Tomioka 100cell high flow cat
HKS Super Turbo Muffler 2.75" S/S Cat Back Exhaust Ti Burnt Tip
Grimmspeed 3 port BC
OMNI 4-Bar map sensor
AEM wide band unit
TurboSmart BOV
Hawker HC20 battery
ETS hotside/LICP
ETS short route UICP
ETS black silicone intercooler hose kit
ETS 3" Front mount interooler (Cusco power brace edition)
JMF 3" intake pipe
K&N RamPod filter
JM Fabrications polished catch can (K&N breather and -10AN fittings)
WALBRO 255l in-tank fuel pump
Buschur/JUN style oil pan
KOYORAD 52mm (OEM fan, shroud trimmed to fit)
KOYO 1.3bar radiator cap
Monster Sport Thermostat
SAMCO SPORT black silicone radiator hoses
SPEC-R.COM.UK purple radiator brackets
JM Fabrications polished overflow bottle
6AN Braided return line and black fittings
OEM EVO VII valve cover (candy purple marble finish, shaved, tapped fittings)
Dress up bolts titanium purple engine bay kit
Toxic Fabrications cam sensor heat shield
Rexpeed carbon engine dampener
Power steering sticker removed & lid painted purple
Carbon coilpack cover
Drydon motorsport manifold cover

100k service done items used:
Gates racing blue balencer belt, timing belt & drive belt
Gates racing tensioner
OEM seals, bearings & gaskets
OEM waterpump & kit
OEM valve cover gasket

GEARBOX/DRIVELINE:
Standard 5 speed
Torque solutions shifter base bushings
RALLIART Support arm bushes x2
RALLIART Diff member bush x2
EXEDY heavy duty clutch

SUSPENSION & HANDLING:
BC BR coilovers
RDA slotted rotors front
RDA slotted rotors rear
GiroDisc magic pads & shims front & rear
HEL braided brake lines
Brakes re-painted gloss black
Cusco power brace
SUMMIT racing front strut tower brace
X3E under brace

INTERIOR & ICE:
Top of the range viper alarm (remote start LCD remote etc)
Pioneerpro series splits
Pioneer 4 channel amp
Pioneer DEH-9350SD CD/MP3/IPOD/USB/ player
Carbon fibre wrapped stereo surround
Carbon fibre wrapped top air con vent panel
Carbon fibre wrapped shifter surround
Carbon fibre wrapped ashtray
Rexpeed carbon fibre hand brake cover
BRIDE material wrapped centre console lid
BRIDE material wrapped glove box
BRIDE material gear boot with red stitching
Vision-R ball type titanium shift knob
All interior and boot lights changed to white LED SMD
Mitsubishi floor mats
Monstersport 60mm single A-pillar pod
DEFI B/F 60mm amber boost gauge and link controller
AEM 52mm AFR wide band gauge
1kg fire extinguisher with RESART bracket
OEM EVO VIII/IX MR sunglass holder
BINARY seat lowering bracket (drivers side)

EXTERIOR:
All wiper arms painted black
Darkest legal tint all round
EVO IX Front Bar
EVO IX Carbon Deck front lip (Currently been made and should be here in about 9 weeks)
Karbonetics Carbon Boot
MINES carbon boot lip
C-West Style EVO IX Carbon Bonnet
Rexpeed carbon rear bar and side skirt extensions
Carbon eyelids
Rear window spoiler
Rolled rear fenders
White LED SMD number plate lights
Power agency shorty antenna
Carbon wrapped window/door seals
Carbon wrapped ABC pillars
Carbon wrapped roof seals
OEM Mitsubishi weather shields

HEADLIGHTS EvoXenoN modded
QUAD projector FX-R (Purple look)
OEM XENON shrouds
Clear GTA indicator lenses
6000k DS2 bulbs
White LED SMD parker globes T10

SHOES & ROLLING STOCK:
DRAG spline drive lug nuts in purple
WORK EMOTION 11R-FT 18x9.5 +25 powder coated white
Negative 1.5 camber all round

post-29112-0-37723400-1386589223_thumb.jpg

post-29112-0-66675700-1386589224_thumb.jpg

post-29112-0-37951000-1386589226_thumb.jpg

post-29112-0-32948600-1386589230_thumb.jpg

post-29112-0-87282100-1386589232_thumb.jpg

post-29112-0-94928100-1386589234_thumb.jpg

post-29112-0-23463400-1386589237_thumb.jpg

post-29112-0-71961300-1386589239_thumb.jpg

post-29112-0-47895000-1386589241_thumb.jpg

post-29112-0-50359100-1386589244_thumb.jpg

post-29112-0-89085700-1386589282_thumb.jpg

Edited by ian_and1
Link to comment
https://www.sau.com.au/forums/topic/436150-evo-7-with-plenty-of-goodies/
Share on other sites

Any interest in swapsies for a turbo diesel van? 1000km to a tank around town, 1200+ highway :P

Seriously though, bloody nice Evo mate! Wouldn't mind it at all

GLWS

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...