Jump to content
SAU Community

Recommended Posts

Neebo is nothing like the track. it is the longer high speed sweepers that cause the problem. The oil goes to one side of the sump and is held there by the G-Force so the oil pick up only breaths air not oil.

This is why I have only gone to Morgan Park in Warwick for track days so far. The track is more like a closed road than a race track. No prolonged corners or high speed bends etc.

GTRman1992 exactly what I've been told. You can never pull as much Gs on the road as you can on the track. But I'd really wanna be safe, so I popped the sump on to have peace of mind. Not really keen on 10 grand worth of damage.

John...yes I believe you have to pull the engine to get to the sump, not too sure on this though.

hey does anyone have any ideas or pics on what a good baffled or gated sump would look like or bits you have seen that are a good idea to inprove on?

I've got my rb25 in bits and just about to put it back together but would like to put some baffling in it as i will be doing a bit of fast driving even though its not a rb26 or gtr i'm guessing the rb25's suffer from this aswell just not as bad?

BTW aftermaket ones are out (i'm a cheap bastard :( ) and know a lot of people that can help with the fabrication.

Thanks

John

The trust oil sump increases the capacity and the sleeve around the new pickup acts as a baffle.

We put one on the Targa prepped GTR and had absolutely no oil surge issues.

The Jun one is just a baffle plate/windage tray and does not increase the sump capacity which is one of the biggest problems with the R. It is virtually the same as the Nismo one and all it did( yes, we tried that first ) was to delay the onset of the oil guage dropping.

My advice is if you are track running a GTR , have a very good fast reading oil pressure gauge with an adjustable red light.

I used that light to save my engine on a few occasions last year when I won the Enjo Speed Event Series.

Do the things Sydney Kid suggest but don't forget , they only have 4.5L std and with the std *oil up the top*problems, there may be as little as 2L left in the sump to run the bearings.

Cheers

Ken

well I would of never though that the R's were like that

another way you guys can fix the prob is running a dry sump set up if your going to be on the track a bit it is not a bad idea a few more dollars in it than $900 but yeah you get the benifit of running a supper cooling oil system & get ride of surge once & for all

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...