Jump to content
SAU Community

Recommended Posts

Ok Guys Upgraded to single turbo so I have a heap of stuff up for sale all from my 34 GTR

$150 Venom 3' Cat

$300 trust Greddy front pipes 70mmx2 - 80mm

$300 34 GTR Intercooler

$550 AFM Z32 80mm

$150 34 GTR Stock Intercooler piping

$500 Arc Airbox

$300 34 GTR Stock Dumps

$300 34 GTR Exhaust Manifolds

$1700 34 GTR Nismo Weldina NE1 Exhaust Turbo back

$1000 34 GTR Trial titanium exhaust cat back 80mm

Also have my twin turbo setup off my GTR that I want to sell as a set as it will benefit someone more, willing to separate at the right price if I have a few buyers wanteing the other parts. looking to get $5000 for the whole set.

GT2860-5's

Greddy Intake piping kit

HPI 3" Dumps (turbo x coated)

Racepace equal length front pipe 3''x2 - 3.5" (turbo x coated)

all items have only been on the car for about 7000km,

the hpi dumps, and the racepace front pipe have only ever been test fitted, as I changed my mind half way through and decided to go single turbo on my GTR

Items are located on the central coast, but can bring to sydney for serious buyers, can ship items at buyers expense.

Contact on here, but would prefer Call or TXT 0409076032.

Kane

post-94184-0-97870200-1387590519_thumb.jpg

post-94184-0-79425900-1387590521_thumb.jpg

post-94184-0-42215900-1387590523_thumb.jpg

post-94184-0-80930300-1387590524_thumb.jpg

post-94184-0-24307100-1387590526_thumb.jpg

post-94184-0-42214000-1387590527_thumb.jpg

post-94184-0-75417900-1387590528_thumb.jpg

post-94184-0-21801900-1387590530_thumb.jpg

post-94184-0-74818300-1387590565_thumb.jpg

post-94184-0-29212100-1387590567_thumb.jpg

post-94184-0-49918200-1387590568_thumb.jpg

post-94184-0-87367400-1387590569_thumb.jpg

post-94184-0-84951300-1387590570_thumb.jpg

post-94184-0-39822300-1387590572_thumb.jpg

post-94184-0-73041700-1387590573_thumb.jpg

post-94184-0-91336700-1387590574_thumb.jpg

post-94184-0-89354600-1387590612_thumb.jpg

post-94184-0-26781000-1387590615_thumb.jpg

post-94184-0-39705400-1387590616_thumb.jpg

post-94184-0-33586400-1387590619_thumb.jpg

post-94184-0-55131500-1387590620_thumb.jpg

post-94184-0-16507800-1387590622_thumb.jpg

post-94184-0-51976900-1387590625_thumb.jpg

post-94184-0-31070700-1387590678_thumb.jpg

post-94184-0-77967000-1387590680_thumb.jpg

post-94184-0-14928200-1387590692_thumb.jpg

post-94184-0-34642700-1387590737_thumb.jpg

post-94184-0-15608800-1387590740_thumb.jpg

post-94184-0-56319900-1387590743_thumb.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/436597-rb26-parts-34gtr/
Share on other sites

Hey mate it's 80mm :), also comes with custom made mid section if you think it's too loud for you, see pics to understand what I'm talking about, sound real tough though! I was making 324kw with it and had no issues it, so you can gauge a power rating :)

  • 2 weeks later...

ok Guys im sick of having so many car parts lying around I just want them gone,

price drop on a lot of items, give me offers if you like.

$250 - 34 GTR Stock intercooler

$500 - Z32 AFM ( only done 4000km)

$100 - Stock intercooler piping

$450 - 34 GTR Arc airbox

$250 - 34 GTR Stock Dump pipes

$250 - 34 GTR Stock Exhaust Manifolds

$1600 - 34 GTR Nismo Weldina NE-1 Exhaust ( same as Z-tune exhaust but stainless steel turbo back )

$1000 - 34 GTR Trial Titanium exhaust ( only done 4000km also comes with extra centre muffler see photos )

also I will part the turbo setup.

$1800 - GT2860-5's ( only done 4000km )

$900 - Greddy Intake Piping kit with Hks AFM Deletes

$600 - HPI 3'' Dump pipes ( Black Ceramic Coated cost $200 ) brand new only ever test fitted

$1000 - RacePace Equal Length Front pipe 3''x2 - 3.5" ( Black Ceramic coated cost $300 ) brand new only ever test fitted

Soon to have:

34 GTR Power FC

Bee*r Limiter

Edited by kaneryan

!!!PRICE DROP!!!

$100 - Stock intercooler piping

$300 - ARC Airbox 34 GTR
$150 - Stock Dump pipes 34 GTR
$150 - Stock Exhaust manifolds 34 GTR
$1200 - 34 GTR Nismo Weldina NE1 Exhaust
$850 - 34 GTR Trial titanium exhaust
$1700 - GT2860-5s
$700 - Greddy intake piping kit
$500 - HPI 3" Dump pipes ceramic coated never been used
$800 - Racepace equal length front pipes 3"x2 - 3.5" ceramic coated never been used

Soon to have

$150 - Bee*r Limiter

$800 - 34 GTR Power FC with hand controller

Come get em!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...