Jump to content
SAU Community

Fs: Wrecking 1996 R33 Gtst White - Townsville


Recommended Posts

Hey guys,

In the process of completely stripping down a white 1996 R33 GTST located in Townsville. Heaps of parts up for grabs so if you want something specific let me know.

Would prefer local pickup but small parts I don't mind freighting.

Some prices and parts include:

Aftermarket parts

Plazmaman plenum and Plazmaman throttle body

Aftermarket billet fuel rail - $50

Built long block engine (refer to my other for sale thread on the engine alone) - $5000

Garret GT3540 1.06 exhaust housing, 6boost, tial gate, screamer, dump pipe, intake pipe and K&N filter - $3000

Splitfire coilpacks (S2 GTST and R34 GTR)

Tial BOV on intercooler pipe with v-band flange - $200

Koyo radiator and shroud

Greddy front mount and intercooler piping

Link G3 plug and play ECU

Front aluminium strut brace

Fibreglass rear bumper (unknown brand) - $100

Fibreglass front bumper (Trust style)

Boss kit

3.5" X-force exhaust system with Varex muffler and decat pipe - $500

Rockford Fosgate 6.5" component speakers

Rockford Fosgate 6.5" co ax speakers - $50

OEM parts

5 speed manual with Exedy twin plate clutch (worth over $2000 alone)

Front and rear brakes with DBA slotted rotors, brake lines and EBC Red Stuff Pads - $1000

Alternator - $50

Starter motor - $40

Power steering pump

A/C compressor

CAS

CAS bracket

LSD diff

OEM suspension

Master cylinder

Stock wheels with tyres (6 available) - $50 each

Series II headlights

Series II front grille

Drift lip rear spoiler

Boot lid

Side mirrors

Bonnet - $200

Rear tail lights - $50 ea

Reo bar

Front Seat belts - $80 each

Rear Seat belts - $80 for all

Passengers side front guard - $70

Door cards - $100

Passenger side window switch - $50

Centre console with armrest - $80

Heaps of other parts available just hit me up. More than welcome to come and have a look at parts first.

Thanks guys.

Phil

  • 2 weeks later...
  • 2 months later...
  • 2 weeks later...
  • 2 months later...
  • 4 weeks later...


  • Similar Content

  • Latest Posts

    • With the system, once you drive it for a bit, and before you turn the car off, does the car fix its date and time? When you say the date is wrong, what date does the vehicle think it is, and does it always show the same date? My thoughts from a process driven view is; The system may be defaulting to a standard start date/time. The main reason you'd typically see this occuring, is the system is losing its constant/backup power supply.   If its always defaulting to the same date/time at start up, and especially if it fixes itself while driving, I'd say either the non volatile memory has an issue, or the power supply to the volatile memory that stores this information.   The other thing I'd check is if there is anywhere in the system you can adjust the date and time from. If the date/time is still moving forward since it wished you happy new year, then it is 100% possible the system has just had a bit of data corruption occur, and you likely need to find a way to reset the date/time in the vehicle.
    • Scissor Jacks are an accident waiting to happen, the only time they should be used are in an roadside flat, even then a tyre and rim should be placed underneath 
    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
×
×
  • Create New...