Jump to content
SAU Community

Recommended Posts

1989 R32 GTS-T 4 door, 200rwkw

Engine:

rb20 115,000km

metal head gasket

arp head studs

gates racing timing belt

nismo thermo stat

splitfire coilpacks

R34 injectors

K&N panel filter

two rubber intake pipes fed directly into air box

metal intake pipe into turbo

high flowed RB25 turbo

3inch exhaust turbo back

R33 GTR intercooler with black pipe work

D1 oil catch can

Greedy profec 2 boost controller

re-mapped ecu

Weight reduction:

removed all sound deadening

removed all hicas

removed ABS - runs BM50 now

removed all air con

Other:

davis craig thermo fan controlled by witch in cabin

boost gauge

nardi wheel

heavy duty clutch

T clamp hose clamps used throughout

Just paid 12 months rego

$7,000 or nearest offer, I do not use this car so make an offer

Call or text Chris 0402 572 813

Please note I am not on this forum much so utilise contact number.

post-38932-0-31473700-1389485954_thumb.jpg

post-38932-0-01240600-1389485995_thumb.jpg

post-38932-0-64698400-1389486005_thumb.jpg

post-38932-0-93242500-1389486013_thumb.jpg

post-38932-0-07915500-1389486025_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/437460-r32-gts-t-4-door/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...