Jump to content
SAU Community

Recommended Posts

First checkout the link below for proof I can be trusted to post as I'm an ebay POWER SELLER:

http://feedback.ebay...eedbackAsSeller

JVC stereo RRP $2700 (I paid $2599 at JB HIFI see sticker on box) $350

Triple Channel German Ignitors x2 (As per link below: Haltech buy them from the same place & sell them upwards of $190 each), Plugs & Heavy Duty Core Cables Total RRP $460+ NEW $250

http://www.horsepowerinabox.com/HPIAB2/category61_1.htm

http://www.myshopping.com.au/ZM--1220892254_Haltech_Ignition_Module_Triple_Channel_Igniter_DUMB

Apexi RSM Limited Edition + G-Sensor $240

GTR ECU $170

R32 GTR Main Gauge Set $150

AEM PLX EGT (Exhuast Gas Temp Sensor Kit + Adapter for O2 bung) USED less than 10 times RRP$155+ $110

Nismo Front Strut Brace $120

R32 GTR Rear Spoiler $120

R32 GTR 3 Gauge set (5 here) $90-$120

GTR AFM done about 90,000kms $100 (EACH)

GTR Coil Packs x 6 done about 90,000kms $100

R32 GTR Center Air Vent $90

R32 GTR Climate Control $90

Sard Fuel Pressure Reg $90

R32 GTR Ignition Module Transistor (Will fit R32,R33 & R34 GTR's) $90

Blitz FATT Turbo Timer $45 ($60 with a Harness)

22x Narrow / Light-Weight Wheel Nuts + Tool for Thread 1.25 x 12 $50

Apexi Boost Pressure Sensor 499-X002 for AVC-R $50

HKS Turbo Timer with NT-1 Harness (refer to photo for compatible vehicles) $50

R32 GTR Ash Tray $50

R32 GTR Tail Light TH1 $50

R32 GTR Driver Side Air Vent $40

R32 GTR Fuel Rail painted RED $35

R32 GTR Full Set of Blue LED's for Gauges $30

Fuel Pressure Gauge $25

Turbo Timer Harness NT-1 for BNR/HCR/HNR32 S/PS/RS/RPS13, A31, RNN14, VNW30(95/8-On), C23(95/8-On) $20

Jack NEW $20

Cheap & Nasty Boost Gauge NEW $15

R32 GTR Headlight Relay $10

YOU MUST CONTACT ME BY PM OR EMAIL

Pick up from Wyndham Vale VIC (sometimes Dover Heights NSW)

Or

Postage on most items is $20 with Tracking or $25 with Signature/Insurance.

Contact Brett at [email protected]

post-60944-0-84919800-1389652203_thumb.jpg

post-60944-0-66764100-1389652213_thumb.jpg

post-60944-0-63805300-1389652226_thumb.jpg

post-60944-0-09330000-1389652247_thumb.jpg

post-60944-0-01385500-1389652254_thumb.jpg

post-60944-0-42074100-1389652261_thumb.jpg

post-60944-0-45206100-1389652265_thumb.jpg

post-60944-0-29937300-1389652269_thumb.jpg

post-60944-0-64376600-1389652273_thumb.jpg

post-60944-0-38064900-1389652277_thumb.jpg

post-60944-0-28574800-1389652282_thumb.jpg

post-60944-0-85442200-1389652285_thumb.jpg

post-60944-0-45386300-1389652288_thumb.jpg

post-60944-0-71943700-1389652292_thumb.jpg

post-60944-0-60619900-1389652296_thumb.jpg

post-60944-0-28473500-1389652320_thumb.jpg

post-60944-0-04322500-1389652371_thumb.jpg

post-60944-0-54478400-1389652383_thumb.jpg

post-60944-0-25659500-1389652388_thumb.jpg

post-60944-0-64525500-1389652401_thumb.jpg

post-60944-0-49208100-1389652409_thumb.jpg

post-60944-0-77974600-1389652414_thumb.jpg

post-60944-0-58034700-1389652418_thumb.jpg

post-60944-0-76044300-1389652420_thumb.jpg

post-60944-0-86375900-1389652427_thumb.jpg

post-60944-0-20624300-1389652434_thumb.jpg

post-60944-0-61619800-1389652438_thumb.jpg

post-60944-0-26912500-1389652443_thumb.jpg

post-60944-0-08976100-1389652446_thumb.jpg

Edited by Sydneyactionman
Link to comment
https://www.sau.com.au/forums/topic/437556-lots-of-good-parts-left-over/
Share on other sites

  • 1 month later...
  • 1 month later...

PRICE DROPS & WHAT'S LEFT

JVC stereo RRP $2700 (I paid $2599 at JB HIFI see sticker on box) $350

Triple Channel German Ignitors x2 (As per link below: Haltech buy them from the same place & sell them upwards of $190 each), Alloy Heat sinks, Plugs & Heavy Duty Core Cables, all NEW Total RRP $460+ I'll sell for $250

http://www.horsepowe...ategory61_1.htm

http://www.myshoppin...el_Igniter_DUMB

GTR ECU $150

R32 GTR Main Gauge Set $110

R32 GTR 3 Gauge set (5 here) $70-$100

GTR AFM done about 90,000kms $90 (EACH)

GTR Coil Packs x 6 done about 90,000kms $90

R32 GTR Center Air Vent $90

R32 GTR Climate Control $90

R32 GTR Ignition Module Transistor (Will fit R32,R33 & R34 GTR's) $80

A Pillar Trim/Covers (Excellent Condition with no holes) $65 each or $100 for the pair.

HKS Turbo Timer with NT-1 Harness (refer to photo for compatible vehicles) $50

R32 GTR Ash Tray $50

R32 GTR Tail Light TH1 $40

R32 GTR Driver Side Air Vent $30

R32 GTR Fuel Rail painted RED $30

R32 GTR Full Set of Blue LED's for Gauges $30

Fuel Pressure Gauge $20

HKS NEW Turbo Timer Harness NT-1 for BNR/HCR/HNR32 S/PS/RS/RPS13, A31, RNN14, VNW30(95/8-On), C23(95/8-On) $20

Jack NEW $20

R32 GTR Headlight Relay $10

post-60944-0-18973900-1398110795_thumb.jpg

Edited by Sydneyactionman
  • 2 weeks later...
  • 3 weeks later...

PRICE DROPS & WHAT'S LEFT

JVC stereo RRP $2700 (I paid $2599 at JB HIFI see sticker on box) $350

Triple Channel German Ignitors x2 (As per link below: Haltech buy them from the same place & sell them upwards of $190 each), Alloy Heat sinks, Plugs & Heavy Duty Core Cables, all NEW Total RRP $460+ I'll sell for $250

http://www.horsepowe...ategory61_1.htm

http://www.myshoppin...el_Igniter_DUMB

GTR ECU $140

R32 GTR Main Gauge Set $100

R32 GTR 3 Gauge set (5 here) $60-$90

GTR Coil Packs x 6 done about 90,000kms $90

R32 GTR Climate Control $90

R32 GTR Ignition Module Transistor (Will fit R32,R33 & R34 GTR's) $80

A Pillar Trim/Covers (Excellent Condition with no holes) $60 each or $90 for the pair.

HKS Turbo Timer with NT-1 Harness (refer to photo for compatible vehicles) $45

R32 GTR Ash Tray $45

R32 GTR Tail Light TH1 $20

R32 GTR Fuel Rail painted RED $25

Fuel Pressure Gauge $15

Jack NEW $20

R32 GTR Headlight Relay $10

Edited by Sydneyactionman
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...