Jump to content
SAU Community

Rb25Det Not Firing

bsx_comp_9

By bsx_comp_9,
in General Maintenance

 Share

Recommended Posts

bsx_comp_9 Rookie

bsx_comp_9

Posted
Posted

Installed a new cam and crank angle sensor into my rb25det. tried to start the car and its turning over but not firing. The fuel pump, injectors and coilpacks aren't getting any power, and now my microtech lt hand controller screen doesn't turn on. Can anyone help me out?

Link to comment
https://www.sau.com.au/forums/topic/438091-rb25det-not-firing/
Share on other sites
rb2534 Rising Star

rb2534

Posted
Posted

Doubt there is anything when installing the cam that could have caused any dramas with the fuel pump and microtech mainly, if the CAS wasn't plugged in it shouldn't fire but like I said that shouldn't really affect the other items.

Is there's an immobiliser or alarm on the car? Like most alarms it will cut ignition/power until its dis armed inlcuding fuel pump, dash and even the ECU

rb2534 Rising Star

rb2534

Posted
Posted

I was thinking maybe a fuse/relay originally but for all 3 things to drop out at the same time it would be a bit of a coincidence, but as I don't know a hell of a lot about Nissan electrics they may all in fact run off one fuse/relay.

That's why I thought something along the lines of an immoboliser or alarm in which it's purpose is to kill those 3 systems as well as ignition (no power to the microtech) in one go

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • sonicii
      Steering lock/control unit Infiniti G37

      By sonicii · Posted

      Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...