Jump to content
SAU Community

Happy Laps - Queensland Raceway 22-03-14


Recommended Posts

Event:
Happy Laps - Queensland Raceway
Description:
A chance to get out on track for a fun cruise and have some om nom noms! Bit of spirited driving is allowed but it is still an event on a race track so a few rules need to be followed (see below). Also if you have not done QR before this is your ticket in to Lakeside.
Location:
Queensland Raceway
Date:
Saturday the 22th of March.
Time:
7:00 AM Arrival
Cost:
$35 for members and guests of members
$50 for non members
Please note that this is a per person cost, any passengers etc are required to pay as well.
Requirements:
1. QR have a minimum age of 12 for passengers.
2. No overtaking in the first 2 laps.
3. The overtaking car is responsible for completing the overtaking move safely.
4. Overtaking is only permitted on straights, unless clearly waved passed by the car in front.
5. Overtaking move must be completed well before the end of the straight, and the car being overtaken must be given plenty of room.
6. Cars should not be more than 2 abreast at any point on the track.
7. Be aware of cars around you, in front and behind (and beside when being overtaken).
8. Do not assume that the car in front of you knows you are there.
QR RULES

10. There is to be no racing

11. The straights are speed limited to 120km/h

12. Any car that goes off the track will be pulled off

13. There is not to be more than 1 sec of tyre smoke.

14. There are to be no helmets

15. Vehicles must have current registration and number plates are not to be obscured in anyway

We are moving away from cash on the day so if you are attending please pay several days before the event. Since our bank takes several days to clear and provide details of payments please pay well in advance.

Payment Details:

Name: Skylines Australia Queensland Club

Bank: Westpac

BSB: 034 063

ACC: 354012

PAYMENT REFERENCE: Username&HappyLaps

Attendees:
1. Cadmoon +1
2. Captian Natro PAID
3. Kiwi_Phil +1
4. philsutty
5. AndrewK34 +1 PAID
6. wolfman 101
7. fusion07
8. gts032 +1 PAID
9. Bubbles
10. NW007 +1
11. DYL33
12. cowdy +1
13. Terror
14. Matty95
15 8MYCASH +2
About 15 Evo's to chop.
(45)

I don't think any of the three of you have a hope around qr when the abombs in full stride lol :ninja:

15 laps, average lap time on the clubman or sprint track. Then week see who has a hour in hell :-P

I don't think any of the three of you have a hope around qr when the abombs in full stride lol :ninja:

Needs much better tyres, brakes and proper suspension setup + diff.

Mad skillz alone won't get you very far LOL

You have no hope :ninja:

1 flying lap around club man...

Side note what's wrong with my diff/suspenion?

Said it before, your 33 viscous diff is hopelessly unreliable and over time will single leg once the viscous fluid goes past it's use-by date (if they haven't already).

Coilovers alone aren't the answer to track work.

Have you sorted out proper alignment settings for track work? Adjustable arms?

Some of these guys have...

You won't be chopping anyone except for people like me and that's not saying much :P

That car of yours belongs in the sticks and not on the track.

Just so you know I'm just stirring. Pretty rough day at work so far...........

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...