Jump to content
SAU Community

Happy Laps - Queensland Raceway 22-03-14


Recommended Posts

I more than likely will be coming (to this and the tuned performance dyno),

none of friends invited have committed as yet,

and hopefully the repair cost for the intermittent misfire on the silvia doesn't blow all my spending money.

I more than likely will be coming (to this and the tuned performance dyno),

none of friends invited have committed as yet,

and hopefully the repair cost for the intermittent misfire on the silvia doesn't blow all my spending money.

Doesnt matter what you bring,as long as your there,just a great morning,i find these happylaps better than the ds ones,but thats just my opinion.

not long now,checked all my intake pipes and hoses,cleaned out the throttle body,and cam cover,took it for a quick squirt to make sure every thing was ok,now only have to wash,fuel up,and ill be ready to roll.Only way to keep reliable is by doing regular checks.ps,also did an oil change and filter,just because.

Doesnt matter what you bring,as long as your there,just a great morning,i find these happylaps better than the ds ones,but thats just my opinion.

If you like actually going a decent pace around a track they are far better than the DS ones.

I did my first DS on the weekend, was good but to many cars, and also developed shuddering through steering when braking down from high speed. Any ideas I believe it could be rotors? Will hopefully get it in before Saturday's fun.

I did my first DS on the weekend, was good but to many cars, and also developed shuddering through steering when braking down from high speed. Any ideas I believe it could be rotors? Will hopefully get it in before Saturday's fun.

Is it really bad shuddering? I get some slight shuddering after my rotors heat up but as soon as I get on the road they are perfectly fine again.

List updated with cleared payments. If you haven't paid yet please DO NOT pay into our account now as it may not clear and be confirmed by saturday, just bring cash (preferably correct please) on the day.

List updated with cleared payments. If you haven't paid yet please DO NOT pay into our account now as it may not clear and be confirmed by saturday, just bring cash (preferably correct please) on the day.

I have a +1 coming now, and will pay cash on the day. L98 v8

Is it really bad shuddering? I get some slight shuddering after my rotors heat up but as soon as I get on the road they are perfectly fine again.

Yeh only at high speed, and yeh seemed to be after about 45mins of driving plenty of heat.Driving back home at 100/110 seemed ok. Spoke to my mechanic tonight he reckons rotors more than likely, and i might get some new pads aswell.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Messing around with. Twin kit for. Rb30/26  
    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
×
×
  • Create New...