Jump to content
SAU Community

Recommended Posts

Left over parts from wrecking my Black R33 GTST S1.5.


All large parts are pickup in Macleod, VIC, but some smaller ones can be posted at buyers cost.


All parts are in pretty good condition unless stated and prices should be pretty good unless it's a bit of effort to get the part out.


Check out the list and let me know if you further info or pics.



HKS Pod filter with adaptor - Needs new foam $30

Intake manifold - No sensors $50

Engine mounts $50

Radiator overflow bottle $20

Aircon condenser with piping $50

Power steering pump $75

Power steering reservoir $20

Alternator $65

Fuel pump - No label but was fine for 285+rwkw $60

Clutch master cylinder $50

Manual pedal set $60

Tail shafts $60


Exhaust

Decat pipe - Straight 3in bolt on $30


Wheels

Impul NS-01 light weight racing 17in inc Federal tyres, 70% frt, 40% rr $600

Front 5 stud hubs $60

Spare space saver wheel $40


Stock Suspension

Front castor rods $75

Front upper control arms $50

Rear control arms $75


Brakes

Discs Front $40

Master brake cylinder $50


Exterior

Body shell Still complianced and registerable $400

Rear reinforcement bar $80

Bonnet latch $30

Side skirts Stock or type M $100

Spoiler - Series 1 No stop light and scratched $30

Bonnet Black - resprayed $120

Boot Black $50

Front wheel liner Front RH $15

Series 1 tail lights pair $60

Indicators Nismo Side - clear pair $35


Interior

Front Recaro $160

Wiring loom $120

Rear seats $40

Seatbelt set minus front buckles $60

Instrument panel $60

IP cross car beam $50

Centre console $20

Headliner $30

Handbrake front section $40

Taco - 4in with shift light $60

Pillar trims $20

Link to comment
https://www.sau.com.au/forums/topic/440678-vic-r33-gtst-s15-wrecking-leftovers/
Share on other sites

Steering wheel?

Still on the car but the edging is not in great condition why I hadn't listed it yet.

If still interested I can at least put up a pic tomorrow.

Parcel tray ?

You'll hear it before you see it

Sorry mate, already sold.

The list above is pretty much everything that's left other than a large bucket of bolts that would hold the whole car together.

hey man, how much for the indicators + postage to melbourne (3040)

thanks:)

$30 pickup in Macleod or $40 delivered to 3040. Still in excellent condition!!

Rear wiper arm with plastic bolt cover?

I thought it was gone but I actually still have it with the bolt cover. Pic attached.

$25 pickup or $35 delivered.

post-7819-0-52487200-1395739799_thumb.jpg

Edited by Steg33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If we're going after market gauges, I'm a big fan of Australian made... Get some RedArc!
    • Unless you're fortunate enough to buy a newer car, getting an older style plate to match your name/car is difficult because they've already been purchased.  Unlike other countries, personalised plates are locked to the country and not region, so there can't be multiple versions of the same plate but with a different area code.  Hope that helps
    • People use the numbers to make it look like letters to spell words/names, which is where the illegal spacing comes in. For example this GR Yaris  
    • Today's rock removal from my stock pile out the back into a 4m³ skip bin, I still have a bit to go, hopefully there's enough room in the skip bin, it will be close My daughter and her boy was coming on Sunday to help, but, I got possessed by demons and started work as soon as the bin arrived at 1230 today Lots and lots of barrow loads were achieved  Currently I'm sitting on the lounge drinking beer thinking of how I should have waited till Sunday for some help, tomorrow will be a day off, in saying this, my day off will involve prep and paint of my alloy coolant and PS tanks with wrinkle paint (Jackie is in Sydney till Sunday so the home oven will get a run curing the paint....LOL)
    • That's why I said it is a meaningless term. Because there is more than one meaning that people can apply to it. When we said "highflow", that is exactly what we mean, and exactly what is done. In a highflow, they take your housing and machine them out to take bigger wheels, have a better internal profile, etc etc, and fit a new core with the different/better/bigger wheels.
×
×
  • Create New...