Jump to content
SAU Community

Recommended Posts

Left over parts from wrecking my Black R33 GTST S1.5.


All large parts are pickup in Macleod, VIC, but some smaller ones can be posted at buyers cost.


All parts are in pretty good condition unless stated and prices should be pretty good unless it's a bit of effort to get the part out.


Check out the list and let me know if you further info or pics.



HKS Pod filter with adaptor - Needs new foam $30

Intake manifold - No sensors $50

Engine mounts $50

Radiator overflow bottle $20

Aircon condenser with piping $50

Power steering pump $75

Power steering reservoir $20

Alternator $65

Fuel pump - No label but was fine for 285+rwkw $60

Clutch master cylinder $50

Manual pedal set $60

Tail shafts $60


Exhaust

Decat pipe - Straight 3in bolt on $30


Wheels

Impul NS-01 light weight racing 17in inc Federal tyres, 70% frt, 40% rr $600

Front 5 stud hubs $60

Spare space saver wheel $40


Stock Suspension

Front castor rods $75

Front upper control arms $50

Rear control arms $75


Brakes

Discs Front $40

Master brake cylinder $50


Exterior

Body shell Still complianced and registerable $400

Rear reinforcement bar $80

Bonnet latch $30

Side skirts Stock or type M $100

Spoiler - Series 1 No stop light and scratched $30

Bonnet Black - resprayed $120

Boot Black $50

Front wheel liner Front RH $15

Series 1 tail lights pair $60

Indicators Nismo Side - clear pair $35


Interior

Front Recaro $160

Wiring loom $120

Rear seats $40

Seatbelt set minus front buckles $60

Instrument panel $60

IP cross car beam $50

Centre console $20

Headliner $30

Handbrake front section $40

Taco - 4in with shift light $60

Pillar trims $20

Link to comment
https://www.sau.com.au/forums/topic/440678-vic-r33-gtst-s15-wrecking-leftovers/
Share on other sites

Steering wheel?

Still on the car but the edging is not in great condition why I hadn't listed it yet.

If still interested I can at least put up a pic tomorrow.

Parcel tray ?

You'll hear it before you see it

Sorry mate, already sold.

The list above is pretty much everything that's left other than a large bucket of bolts that would hold the whole car together.

hey man, how much for the indicators + postage to melbourne (3040)

thanks:)

$30 pickup in Macleod or $40 delivered to 3040. Still in excellent condition!!

Rear wiper arm with plastic bolt cover?

I thought it was gone but I actually still have it with the bolt cover. Pic attached.

$25 pickup or $35 delivered.

post-7819-0-52487200-1395739799_thumb.jpg

Edited by Steg33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...