Jump to content
SAU Community

Jecs A15-000J01

BlueRB240
 Share

Recommended Posts

paulr33 Grand Master

paulr33

Posted
Posted

Saturated injectors are used in almost all-standard production, 1998, engines because of the system cost and simplicity. Saturated based systems usually fire all injectors at the same time, once every rotation discharging half of the required fuel per cycle at each event. Some systems fire half of the injectors at one time and the other half at a different time. These systems are called "Batch Fire" and "Semi-Batch Fire " respectively. This system is used in 90 % of all general production engines (cost and simplicity). In almost every case Manufactures will only use Peak and hold injectors in High Performance applications or in Turbo applications. This is true in the Ford/Mazda family, Chrysler/Mitsubishi family, Nissan Group and the Honda/Acura folks as of 1997. General Motors/Toyota cars are also in this same family. OEM APPLICATIONS GM uses Saturated Rochester injectors in everything but some of the High performance cars, hear they use Lucas Injectors, and in the turbo trucks they use Bosch. Toyota uses saturated injectors in everything but its turbo models - all Nippon-Denso. Honda, last year changed all but the NSX to saturated, most all of Keihin make with some IPT. Nissan uses saturated units only, as of this year, Jecs or Hitachi manufactures. Chrysler/Mitsubishi - same deal - all but the turbos are saturated, Siemens or Bendix make. Ford uses Bosch or Nippon-Denso depending on the Model. All are Sat. except Turbo Models. Bosch and Lucas injectors are used in VWs.. BMW , Bosch up until this year, now Lucas --- European cars use an assortment of injectors

Link to comment
https://www.sau.com.au/forums/topic/44224-jecs-a15-000j01/#findComment-905947
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...