Jump to content
SAU Community

Recommended Posts

I need some help and info to understand a bit more about turbos. So I understand that a bigger turbine will spool slower on an engine compared to a smaller one.

Most of the info out there comparing turbos focuses on different turbine wheels and housings, but what difference will a different compressor size make between two turbos where the turbine is the same.

Items in question are two garretts.

GTX3067R : http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=GRT-TBO-260&Category_Code=GTX

GTX3076R : http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=GRT-TBO-101&Category_Code=

Both have the same hotside, just one has a considerably smaller compressor. But if both turbos have the same turbine and the same turbine housing will they produce say e.g. 15psi at the same RPM on the same motor?

GTX3067R : http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=GRT-TBO-260&Category_Code=GTX

GTX3076R : http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Product_Code=GRT-TBO-101&Category_Code=

Both have the same hotside, just one has a considerably smaller compressor. But if both turbos have the same turbine and the same turbine housing will they produce say e.g. 15psi at the same RPM on the same motor?

No, they won't - the GTX3067R and GTX3076R will be really different to drive in terms of spool and especially response. Way more inertia on the 76mm, and there are also aerodynamic effects which will come into play. There is a possibility that at steady state on a dyno (ie, find the minimum rpm you can build 15psi by holding WOT against the dyno) there may not actually be as huge a difference as one might expect - but that means next to nothing in the real world.

My take only .

I believe the thing that separates a good system from an average one is what goes on at part throttle - on a roadie anyway .

I will state that if a compressor makes it easy for the turbine to spin up readily it will .

Something I used to mention is that you're not just spinning up a hunk of aluminium when your turbo "spools up" . It's attempting to pump air and the mass of the air being moved adds to the wheels weight/inertia - turbine drive power ask .

As has been mentioned aero tech in the compressors makes a difference and the modern equivalents tend to be lighter and smaller in diameter . Depending on what the designer wanted wheel designs can be smaller whilst pumping more air but the spool priority comes back to the designers goals .

There are obvious differences between a GTX3067R/3076R and while they use the same turbine - both the compressor and its housing is larger on the 76mm version . Also for the sort of power goal you'd expect from a GTX3076 user a larger turbine housing than a 3067 usually gets would generally be fitted so no longer apples to apples .

For a given turbine size the variables are everything on the compressor side vs the turbine housing AR size and type .

A .

Edited by discopotato03
  • Like 1

This link should help, its a bit technical, but answers your questions on airflow.

1st link in the thread is the one you want:

http://www.skylinesaustralia.com/forums/topic/442555-building-the-right-combo/

Those links appear to contain nothing at all to do with what he is asking? And also posting a link to more links seems a messy way of doing things, could have just posted a specific link and explaining what it is.

Anyway, he never mentioned airflow, he was asking about spool/response :wacko:

:unsure:Ok Mr Lith, you seem to know what your talking about! :unsure:

Did you actually READ the link? It is COMPLETELY RELEVENT to spool/response!

Understanding AIRFLOW characteristics of your engine determines which turbocharger is RIGHT - not necessarily the biggest - for your setup!

"Turbocharger Compressor Calculations"

OP's first line: I need some help and info to understand a bit more about turbos.

I'm sure the question at the top of the topic states

Does Compressor Size Radically Effect Lag/Performance "

And the last line in the second paragraph says

" but what difference will a different compressor size make between two turbos where the turbine is the same."

Which I take as he wants info about the compressor side of the turbo, I didn't read anywhere him asking about engine air flow

Lith is right, it makes a sizeable difference in both lag and performance, the 67mm will spool faster but the 76mm will make more power

In my view it is to do with leverage and inertia and even though the weight difference between the two is not a great deal you are trying to change their rpm from say about 20,000rpm to upwards of 100,000rpm ( depending on boost level ) whilst trying to pump pressurised air, so naturally the smaller lighter wheel will spin up faster and the turbine wheel has better leverage against the outlet side of the wheel where the bigger wheel has more volume allowing it to pump more air volume

Hope that helps

Lith, its not his fault he is trying to drink vintage grange and read/reply to forum posts while riding his pushy on a busy back road :D

LOL, you guys don't have a clue!

*sigh* I guess there are some you can't educate......

I'll stick to what I do everyday, building engines - all turbocharged.

Mick, stick to driving trucks & looking out for cyclists! :thumbsup:

  • Like 1

I'm not saying engine air flow doesn't effect the turbo response, I know better then most it does, I'm just saying that isn't what he asked :)

I would probable build engines for a living but it doesn't pay enough :(, so hobby it is

The 26/30 I built MYSELF pumped out 623hp at ALL 4 using HKS GT-RSs ( -10s )and push a 1661kg car plus 100+kgs for me to 10.88 at 132.23mph, not bad for a excavator operator/truck driver :D

Bennis I re read your original post and I'll have one shot at your questions .

Your asked specifically about a GTX3067R and a GTX3076R and having the same identical turbine , which they do , and the same turbine housing which is optional .

Direct comparison is difficult because these two use different compressors and different compressor housings to suit the airflows they can generate . Off the top of my head the flow rates are around 47 pounds/min vs 57 pounds/min so not insignificant .

These compressors are advertised as 67 and 71mm diameters but because of their extended tip blades are actually bigger than this . Also the blade count is different so 10 for the GTX67 and 11 for the GTX76 .

Dimensions aside it was obviously Garretts intention to make the smallest GTX30 turbo their most responsive and a large part of that is making the compressor smaller in diameter meaning less weight or inertia for the turbine to accelerate . The compressor housing on the GTX67 is also a smaller family one so you'd think for a given wheel speed the air speed would be higher .

My experience with turbochargers is that once you reach a certain point boost and airflow wise the whole engine turbo system becomes self feeding and takes off like a rocket at wide open throttle .

Below this point it's quite possible to generate positive pressure at the turbo but not enough to create significant acceleration .

You may think this is getting long winded but the point is I think a GTX3067R is going to reach the varooommm point a bit earlier and get into it's stride a bit sooner than a GTX3076R . I reckon the 67 would get to 15 pounds earlier engine rev wise on say an RB25 because it doesn't have the extra diameter and mass of the X76 wheel and would be spinning turbine and compressor faster as well .

Feedback is slowly getting out there with the GTX3067R after what looked like little market interest in them . I think people doubted a pissy looking 67mm compressor was worth worrying about but in the right app they are shaping up fine .

I'm interested to know what specific engine/car you have in mind and what sort of performance you'd like .

It's difficult to make hard and fast rules with turbocharging because there are different ways to solve different issues and the fixes aren't universal .

IMO with these specific two turbos the GTX3067R is a more modern and efficient GT3071R and the GTX3076R a more compact almost GT3582R with out the bigger heavier turbine .

I think there is enough experience in these matters with the people here not to have to bother with thermal dynamics formulas and ditto polar moment of inertia ones . Different people try different things and eventually you have to go with what you think will suit you best . Getting a ride in someones car that has what you're considering is best provided you know every mod it has and it's tuned properly .

I'm out cheers A .

  • Like 1

LOL, you guys don't have a clue!

*sigh* I guess there are some you can't educate......

You are quite right, we don't. Want to help fix that issue by telling me where in those links it shows what affect on lag and response there is between the two compressors?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...