Jump to content
SAU Community

Recommended Posts

Yo, got a few more R33 bits here lying around:

1. R33 Gts-t rb25 PowerFC, no hand controller. Great condition, taken from running car - $750

post-35556-0-79215000-1399726240_thumb.jpg post-35556-0-55829400-1399726248_thumb.jpg

2. Z32 AFM & plug/wiring. As-new condition, both mesh sides intact - $150

post-35556-0-71848000-1399726266_thumb.jpg

3. R33 GTR front Brembo calipers & matching slotted rotors. Some of the clear has peeled off, but otherwise they're in great condition

Includes some used pads & the matching slotted rotors - still good to use at approx 29mm thickness - $1000

post-35556-0-57232100-1399726506_thumb.jpg post-35556-0-78454600-1399726513_thumb.jpg

4. K-Sport height adjustable coilovers front & rear, suit R33 Gts-t coupe. As-new condition - $750 ono

post-35556-0-87496100-1399726398_thumb.jpg post-35556-0-84895000-1399726411_thumb.jpg post-35556-0-67972700-1399726417_thumb.jpg

5. Set of 6x Splitfire coil packs, SF-DIS-001, suits R32 GTR/GTS-T, R33 GTR/GTS-T (series 1) - $350

post-35556-0-19651600-1399726472_thumb.jpg

6. Adjustable rear upper camber & traction arms, I believe these will suit R33, R34, S14 & S15 as well - $200 ono for both pairs

post-35556-0-85082000-1399726486_thumb.jpg

7. Hicas Lock bar with both arms already installed, just bolt it straight onto the car. Suits R33 & R34 - $100

post-35556-0-79840800-1399726535_thumb.jpg

Located near Kogarah in Sydney for pickup, or I can post them anywhere. PM me or reply here!

How many km's on the splitfires? also quick question - does the R33 Brembo's bolt on to aR32 or needs to be custom fitted?

PM Sent

PM replied

How many km's on the splitfires? also quick question - does the R33 Brembo's bolt on to aR32 or needs to be custom fitted?

Not sure about the exact KM as I bought the car with them already installed. I believe thee Brembo's will bolt straight on, you'll just have to trim the edge of the standard rotor backing plate/stone guard thing, or bend it back

Also got some r33 GTR front seats, pics will be up tomorrow. $900 ono for the pair - pickup only

What brand are the rear arms? and whats the best price you can do picked up this week cash?

I think the blue camber arms are Hardrace, but theres no stickers on it at the moment. PM sent

seats still for sale?

If you want to split them funny enough I would be interested in the passenger seat not the drivers...

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
    • From memory it wasn't too hard to simply see which wire ran where when you plug that in. Unfortunately also from memory the OEM sender does not use the same configuration 99.9% of gauges run. So in other words if you connect the signal wire that was running to the OEM gauge to your DEFI gauge you might find your oil reads at 200C or some other incorrect value. I remember having the same line of thought and then running new wires/senders to match the gauges I have. The pinout is available in the R34 workshop manual.
    • Does anyone on here know which wire on the GTT triple gauge pod harness is for the oil temp gauge? my sensor works fine but I upgraded the gauges to DEFI advance. And if I can simply piggyback off the oem oil temp wire to the Defi oil temp sensor wire that would make life so much easier. 
    • Even face her a wash now that’s it worth more than my house
    • This was what I was invisioning, or Pete cutting a beer can up and hose clamping it around the catch can! Ha ha ha
×
×
  • Create New...