Jump to content
SAU Community

Recommended Posts

Hi guys considering doing the smart thing and bailing on my build considering things have changed in my life

I will only be parting once I get the big items pre sold shell engine box

R34 gtt Stat write off can't be rego'd shell had a front end smack pulled straight rad support not mint needs a bonnet, sus and wheels to roll $3,000 ono

(not interested in your thoughts as I've spent a fair bit to get it looking ok again)

25 neo engine no ecu or injectors $1500 proven running motor not some wrecking yard unknow can be comp tested by buyer if needed

34 25 5 speed box $1500 firm

ORC pull type twin plate clutch $750 firm

HPI R34 Alloy Rad $280 firm

Blitz return flow intercooler brand new in the box $500 firm

r34 gtt fcon ecu and patch loom tuned for cooler and exhaust round 220rwkw atm (info from prev owner) $400 ono

cat back exhaust unknown brand $500 ono

Chinese r33 front pipe brand new $80

Chinese r33/4 dump pipe brand new $50

Kando brand new external gate T67 $850 firm

Kando rb bolt on TD06H 20g internal gate brand new in the box $750

K sport R34 gtt coilovers $600 firm

r34 gtt nistune $500

Turbosmart 45mm gate brand new in the box bought from mtq so legit $385 firm

walbro E85 450l pump brand new $150 bought from mtq again

ev11 or whatever 25 neo 1000cc injectors fitted but not fired again brand new from mtq $550 firm

feel free to mesg me if you have questions

if I don't get what I'm after I'll just put it on the back burner

041

1152

733

post-15018-0-57121300-1400155374_thumb.jpg

post-15018-0-75833500-1400155380_thumb.jpg

post-15018-0-71842100-1400155387_thumb.jpg

post-15018-0-85234800-1400155403_thumb.jpg

post-15018-0-97336900-1400155449_thumb.jpg

post-15018-0-28715100-1400155473_thumb.jpg

post-15018-0-94930300-1400155541_thumb.jpg

post-15018-0-64804600-1400155550_thumb.jpg

post-15018-0-50591600-1400155560_thumb.jpg

post-15018-0-89749200-1400155589_thumb.jpg

Edited by 1400r

If you don't mind me posting up Ryan I've got the triple gauges for the other member.

Also have a mint front section that was cut off my car and ready to go on this if anyone wants to fix the rad support etc properly.

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Did you take the MX5 for a Blat around the Track at all?
    • LOL, "they said it might be slippery"..... 30 seconds in your off, 60 seconds in white twin backs into the corner That new track looks good, and the Datsun was chopping cars quite nicely     
    • I'll get one of these also just for giggles
    • I bought 6 new spark plugs to compare readings. They will be here tomorrow and ill see if meter is far off if it all. I know one is at least reading 0 so its best replace all anyway if one is bad, from experience. I still have to test the harness just to be sure its not a double issue and I waste my time haha-the old plugs are iridium I always thought those lasted more than 50,000 km.
    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
×
×
  • Create New...