Jump to content
SAU Community

Recommended Posts

FOR SALE OR SWAPS. R32 gtr currently making 304kw at the wheels on high boost (19 psi, has 4 different boost settings).

Car was Tuned by Trojan Motorsports. I have a folder with a timeline and receipts for most of the things that have been done to this car since it was imported. The engine has been rebuilt roughly 40,000km's ago, I have only found the receipts for the CP pistons, conrod bearings, ARP rod bolts, cometic head gasket, Genuine water pump, accessory belts, new timing belt tensioner and idler bearings there may be more in the folder, the head was also recoed. All heater hoses replaced with silicone hoses about 10,000km's ago. Motor is very healthy and has never given me any problems, this car has been super reliable and never let me down.

MODS: HKS GT-SS twin turbos
Sard 800cc injectors
Tomei fuel pump
Tomei adjustable FPR
Tomei adjustable cam gears
Apexi Power FC
Apexi boost controller
Greddy 115mm intercooler
Greddy polished alloy piping kit (from pod filters to intake manifold)
Greddy timing belt
Greddy clear timing gear cover
Trust Airinx pod filters
Genuine Bosch z32 AFM's
Splitfire coilpacks
HPI alloy radiator
Autech catch can
HSD coilovers
Driftworks hicas eliminator kit
front and rear camber arms
DBA T3 4000 series club spec slotted rotors front and rear
Project Mu front pads
QFM A1RM rear pads
new Genuine water pump
new accessory belts
new timing belt tensioner and idler bearings
Trojan motorsports did a major service on the car before it was tuned. I also just had the two front drive shafts rebuilt because i had some busted cv boots all fluids have been replaced in the last 5000km's engine oil has been replaced every 4-6000km's Im sure I have forgotten some things...

Wheels: Work Emotion XD9's bronze 18x10+18 all round with near new federal 595 RSR's (265 35 18) about 80% tread. blue work wheel nuts as well with lock nuts and key.. Also come with a set of Standard GTR wheels with roadworthy tires and some boxes with alot of the standard parts that have been removed (intercooler/piping radiator etc..) There is also a mod plate for the turbos!!

THE BAD!!
A tie rod end needs replacing also a front right inner ball joint is busted. also need a wheel allignment. as a result the steering feels a little weird. Brakes are a bit squeeky when cold.

Location: Canberra
Price is $24,000 negotiable.
OR SWAPS...I am in need of a tow car and trailer so if you have either of these, or both send me a pm and we can discuss a swap with or without cash adjustment depending on the dealeo. just send me a PM with what you have and we can go from there.
It will be much easier to reach me on my phone, but txt message is the best because i cannot answer my phone at work or at CIT. PH: 0403 645 640
having troubles uploading photos, can txt a few upon request

Edited by Stoolz
Link to comment
https://www.sau.com.au/forums/topic/443857-r32-gtr-for-sale-24000-neg-canberra/
Share on other sites

Sorry! forgot to add that,

it has a Z sport 320km/h cluster with 236,xxxkm on it, because this is not the standard cluster i cannot be sure how many k's are on the chassis.
its a 1989 model,
thanks for telling me about the photos i will try to figure it out. if you want photos, i can txt some to you.

cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...