Jump to content
SAU Community

Stagea Pnm35 Smart Key Programming / Fcc Id

monts

By monts,
in Four Door Family & Wagoneers

 Share

Recommended Posts

monts Explorer

monts

Posted
Posted

Hey guys

I'm just wondering if anyone could help. I need to organise an additional remote for a 05 pnm35 stagea. I don't have the fcc id number on mine. Just wondering if anyone could share the number so I can find a replacement key from the net. Also has anyone had one of these things programmed? And where

its the one that kinda looks like this

http://www.automotiveworld.com/wp-content/uploads/2013/03/Nissan-smart-key-386x170.jpg

Thanks in advance

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)

Have you tried giving Nissan a call?

Just give them your VIN. Worst case either the price will be more than you want to pay or just simply won't help "because import".

If they won't help, try another Nissan dealership.

If you PM me your VIN, I can get you the part number if you want, that way they only have to look up pricing.

Edited by iamhe77
PN-Mad Grand Master

PN-Mad

Posted
Posted

Yup, I've had one done.

Its a fairly easy process for a decent mechanic at the dealership.

Part# is 285E37W00D $162.24 for me. Nissan Call it a "Switch". You can look it up in FAST or EPC Data using your VIN. You DON'T need the physical key part of it to make it work. However, if you need a back up, then buy one, but it will work fine without. Nissan sell the Fob and the key that slides in separately.

Then, take key and car to a dealer, and ask them to code it to the car using CONSULT.

Because of NATS, there is no way to DIY. Have to pay an hours labour to the Dealer to code it.

Happy days.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • soviet_merlin
      R32 GTST - 600KW+ RB28/CD009 Build

      By soviet_merlin · Posted

      What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...