Jump to content
SAU Community

Recommended Posts

Hello i was pumping up my tyre and i noticed what looked like black paint or like someone has drawn a line with a black permanent marker on the chrome lip of my rim, it is shiny and black does not feel like a scratch cos if i run my finger over it i carnt feel it at all but it looks like a black mark on the chrome lip, the lip is also slightly dipped in so if i got too close to something the scratch would be on the bit that sticks out more and not the bit that dips in, i tried to clean it with solvents and then with polish but nothing removes it. And i just dont understand why it is black for cos it is on chrome and as i said you carnt feel it at all running your finger over it, so does anyone know why it is like this? and how do i fix it

post-229-14030389276813_thumb.jpgpost-229-1403038964528_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/444581-lenso-rims-scratch/
Share on other sites

I'd say its painted chrome which is usually painted over a black base ,in which case the paint has scuffed through....I have a wheel the same, is painted black chrome...you can't really fix it though you could try repaint the area, it might come up ok.

btw the way carnt is not a word, the word is Can't , its an abbreviation for can not ;)

I'd say its painted chrome which is usually painted over a black base ,in which case the paint has scuffed through....I have a wheel the same, is painted black chrome...you can't really fix it though you could try repaint the area, it might come up ok.

btw the way carnt is not a word, the word is Can't , its an abbreviation for can not ;)

That "cannot" be right ;)

That "cannot" be right ;)

man I actually checked that, well by checked i mean I asked the wife cause I couldn't rememeber, is cannot 1 or 2 words...she said 2, she's the one who reads books all the time, so I took her word for it..I just read car forums and most people here have worse grandma than me...

but for the sake of clarity

http://www.dailywritingtips.com/cannot-or-can-not/

we are both right ;)

Mick you are still wrong mate, back to school you go carnt!

lol and i now know what the black is, it bugged me on how it hot in the lip cos the lip is dipped in on the middle and i have worked it out, it is not paint that came off and black under it, someone had rubbed there tyre onto my rim and that is rubber transfer cos it can be scratched off with an abrasive and its chrome under it but no solvent will touch it at all for some reason, and using abrasive will take the clear coat off which im not worried about cos i have white stone chips all over the clear anyways so looks like i have to polish all the clear coat off all the chrome and thats a massive job

man I actually checked that, well by checked i mean I asked the wife cause I couldn't rememeber, is cannot 1 or 2 words...she said 2, she's the one who reads books all the time, so I took her word for it..I just read car forums and most people here have worse grandma than me...

but for the sake of clarity

http://www.dailywritingtips.com/cannot-or-can-not/

we are both right ;)

Mick you are still wrong mate, back to school you go carnt!

BA (hons) (usyd)...cannot :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...