Jump to content
SAU Community

Recommended Posts

Terry, it's got nothing to do with moronic Australian politicians, the value of the Aussie dollar is well and truly out of their hands, the yen is being devalued by Bank of Japan who Prime Minister Abe was able to finally place a puppet in charge of the whole operation and devalue the yen against the US dollar and roll the money printing presses. The US dollar had got extremely weak against the yen and Abe as part of his Abenomic plan had to get the presses rolling.

With the US having had their money presses going full bore for quite some time the Aussie dollar is propped way above what it's worth.

Won't come down until the US and Japan are happy with their economic status and ready to stop their presses and let their currencies run their normal trend, but when it does drop, it's going to hurt people big time.

Problem is in Australia most people financially walk round with their heads up their arses with no real clue whats going on on world scale with market manipulation and currency drives. The old it'll never happen here attitude is going to see a lot of people hurt in future years.

The other thing to keep in mind is all models of the Skylines are getting long in the tooth now and Japanese part manufacturers are slowing fading parts out of production.

With the average Tanaka not being able to afford big mods anymore (and really have not for quite some time) more and more manufacturers are shutting shop or adapting to the market and making parts to suit what the Japanese are buying these days. Have a look at the Top Secret catalogue these days, parts and kits for Prius's !!

I personally know of one huge Japanese aftermarket company that is slowly winding down their performance part production, shutting showrooms and workshops down accross Japan and have set up their main factory to build truck gearboxes and special earthquake shock absorbers for buildings. They'll be around for a bit longer thanks to the GTR35 but change is already happening and other companies are following suit.

People seem to think the foreign call for parts is big business but it's insignificant compared to Japanese local market and to survive it's either adapt or shut the doors.

  • Like 1

Good for us here at SAU to know - so thanks!

Makes me wonder what motive GS at the Reserve has for spruiking warnings about the housing market too.

It certainly is overheated - probably as he says, that houses are overvalued.

Thus, if he's correct, it's probably better to buy imported things NOW whilst the dollar is good > from DIY on the house to buying TVs, car spare parts or even a grey import vehicle - did I say NOW?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Here's the workaround with Nistune I was talking about, just add in more timing on the decel table And play around with the fuel cut & recovery, it's enough to stop it from stalling on a decel  
    • Hi Apex and welcome! 
    • Probably too late to reply to this, but worth a try. It's not calliper flex, the calliper as a whole is moving so it has to be calliper mounting bracket flex.  Calliper mounting brackets are designed to stop the calliper rotating, they don't need to be designed heavy duty to stop the calliper moving in and out.  Whatever it is is not the major cause of poor pedal feel, the outer pistons are moving towards the disc rotor the same amount as the inner pistons are moving away from the disc rotor.  Hence no change in fluid usage, what extra fluid is needed to move the outer pistons is recovered from the inner pistons. For a calliper to move as a whole by far the most common reason is the rotor is not perfectly centred in the calliper.  The first thing I check is that hub face is perfectly clean, bare metal, where the rotor hats contacts it.  Then I check the that rotor is firmly held in place by at least 3 wheel nuts (or equivalent). If all of the above are confirmed to be in perfect alignment then I would check the piston sizes and ensure that the 3 inner pistons and 3 outer pistons have matching diameters (eg; 28/32/36mm).  I have seen a no name 4 spot calliper that had 1 of the 4 pistons a different diameter. Maybe I missed it, are both the callipers exhibiting the same problem? I would remove the transfer pipe and inspect it to make sure that there are no restrictions. Maybe you already have but if not I would return them with the video and have them confirm all of the above.   Hope that helps Cheers Gary    
    • If you have the original log book and it didn't have a chassis number quoted, then no money required.  I have "rechassied" a number of race cars, no problem as long as you have the original log book.   Cheers Gary
×
×
  • Create New...