Jump to content
SAU Community

Recommended Posts

Been lurking on this forum for a while and I have also been monitoring the prices of 2009 GT-R's. I was wondering when you think the private prices will drop to around the 70-75K mark, recently a car was auctioned by Grays online with a final sales price of $73,500 the car had ~60,000km. There have been a few examples of 85K on carsales however these don't last long or they are JDM 2008 GT-R's.

I know a GT-R is an amazing car and great value for money, I just find it interesting that their depreciation has plateaued or at least the price at which they are advertised. With some of your expertise do you think these cars are likely to fall around the 70K mark around February/March next year? Would the 2015 Model effect the price this much and also with anticipation of the new GT-R result in a similar change.

Feel free to voice your opinions

Link to comment
https://www.sau.com.au/forums/topic/445996-2009-gt-r-prices/
Share on other sites

I cant see them falling that far for a long time yet. Remember that these were a $170k car.

If you have the cash or the means, do it now. Who knows where you will be in 1 year from now.

2015 model will make absolutely no difference at all. R35 may.

Edited by turboadam

You didn't mention the auction car sold for $73,500 commands another 7% which then takes it close to 80k. Then add all the other bits like rego, possible new tyres, servicing, etc and the cheap selling price now seems a lot more.

The 7% is a fixed fee so that should probably be included in the calculation, but servicing tyres and rego could be an addition to every car bought second hand, however there is always an added risk to buying cars from auctions and arguably you can do a better deal privately with cash in hand.

It's certainly a great car for the price, but its holding value better than an M3 or a C63 or nearly every other car made in that year at that price point. I usually take redbook with a grain of salt however their prices are

Private Price Guide $80,500 - $88,100 Trade In Price Guide $71,800 - $79,400

and for the premium

* Private Price Guide $82,700 - $90,400 * Trade In Price Guide $73,800 - $81,500 * Average Km 50,000 - 90,000

If R35 prices dropped to 70k, good R34 GTR would need to be selling for under 40k. used car market on performance cars is based on bang for your buck as well. Will be a few years till it gets to that price in my opinion.

I guess like with anything to anything the value of the car is what a person is willing to pay for it! I doubt many 15 year old cars can command what the BNR34's do these days, but there is always that bang for buck element with these cars

It states this on their site.

Buyers Premium

A buyers premium of 7% applies to all lots purchased in this auction.

For example: Successful Bid Price is $100.00 + 7% Buyers Premium = $107.00 Invoice Total

Yeh but even with the 7% premium we are still looking at 78,645, which is quite a difference from the Private/Dealer prices

Auction cars can tend to get a fair bit cheaper.

The trade off being you can't drive the car- that's very risky for an R35.

I imagine prices will hold firm for quite some time, these cars are in demand and production is low.

Edited by IOWNU

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...