Jump to content
SAU Community

Recommended Posts

BIG NEWS: An Australian Court has accepted authenticity of Japanese Registration Certificates provided by JOC


This buyer of a wound back car has received the original Japanese papers from JOC and then went on to win his case in the NSW Civil and Administrative Tribunal. This is a break-through!


Here is the text from the Daily Telegraph:


READER Apurva Mishra has prevailed in his car-clocking crusade. In April, Public Defender reported Mr Mishra was taking action in the NSW Civil and Administrative Tribunal, alleging the imported Lancer he paid Sydney’s Prestige Auto Centre $30,000 for had travelled about three times the 34,000km the odometer said.


The NCAT ruled Prestige Auto Centre had engaged in “misleading and deceptive conduct” and ordered it pay Mr Mishra $18,526.


NCAT senior member Sabine Thode said: “I am satisfied, on the balance of probabilities, that the odometer reading was changed by the respondent or that a third party changed the odometer reading with the knowledge of the respondent in order to mislead or deceive the applicant.”


The NCAT accepted the Japanese Registration Certificate Mr Mishra presented. This is important, as it was bought through a third party, not the registry in Japan, but Mr Mishra was able to demonstrate its authenticity. Until now there has been a question mark over whether such documentation is legitimate.


This result should serve as a warning to any dealer considering winding back odometers.



Read more on our FB page:



  • Like 3

The dominoes shall fall thanks to the efforts of honest activists like yourselves and victims who are determined to become survivors!

We in the SAU.NSW Exec have been keeping a reference file called "Rogues and Villains" so we can advise Members who wish to receive information...

  • Like 3

Even with an $18k payment to the car buyer? I think that would eat most of their margin on the sale of a $30k Lancer.But if only 1 in 5 people take them to court, I guess they may be undeterred.

"Punishment doesn't fit the crime!" - I agree.

Before social media, when hard copy newspapers and tv offered the only exposure, any scamming company could simply pop up a new head like Medusa.

But now with fb and forums, methinks "their name is mud!" > shame, shame, shame.

It's even common knowledge that one of those scamming thugs left two dead rats at an activist's doorstep.

  • 8 months later...

We've all known it's been happening for years, this issue was with us early guys was there was no way of proving it. we just accepted that there was no such thing as an import with legit kms.

Times have changed and there are way to prove every thing now but it's still a case of buyer beware and do your home work and spend the extra time to find the right car

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...