Jump to content
SAU Community

Recommended Posts

1) Are you missing a Sticker? I've had a few re-done; apparently suitable for high heat areas. And you can see one on the strut brace below. $20 including post.

Terry-34_zps9c2c234f.jpg

2) Nismo Strut Brace for the R32 GT-R (or R32). $140 plus your courier cost.

Terry-38_zps95d5b7cd.jpg

Terry-41_zpsa13a1b61.jpg

Terry-40_zps39205b3b.jpg

Terry-39_zps47861678.jpg

3) Steering Wheel (OEM) off a BNR32, but there is a 20c patch that has degraded at the very top. Example below. $285 plus post.

Aussie_Delivered_R32_GTR-1_zps198e8f37.j

4) Steering Wheel (Momo) off a BNR32. I'll have to take a look but I think the condition of this is also good. $200 plus post.

Terry-16_zps5b928668.jpg

5) ECUs off BNR34s. Still have Japanese tuning installed. The one on the left is from a V-Spec II. The one on the right is from an N1 and it's a Mine's (without the plaque). Suitable to install LINK etc. $75 each plus post.

Terry-42_zps042cc5bc.jpg

6) ECU off a BNR32 will be available shortly. $75 plus post.

7) Plenum off a BNR32. No links or gaskets. Available now with black paint half missing. $75 plus post.

8) BNR32 N1 (OEM) Front Bar (repaired). Two hairline cracks on the top 2 corners. $550 plus your courier arranged. Dstrbu still owes me the duct inserts.

Dstrbu-2_zpsb62231de.jpg

Dstrbu-4_zps5797fda5.jpg

Dstrbu-5_zpsc8c4e016.jpg

9) BNR32 Front Splitter/Dam (aftermarket I believe). Good condition. $150 plus your courier cost.

Dstrbu-1_zpsbd9f6299.jpg

Purchasing or enquiries available via PM.

Sorry guys, but I've had no luck in working out how to upload steering wheel pics from my XPeria Z1 into My Pictures.

Might have to try and take pics with the camera I usually use.

#2 Strut brace has been sold/taken.

#1 2x Nismo stickers sold.

4) Someone told me, "This is hideous", so I think I should reduce it to $190.

Terry-43_zpsb8c53aab.jpg

Yes, it's for a BNR32.

1) Another Nismo Sticker to be posted today.

1) going going

2) gone

3) due to be inspected

4) stuck > reduced to $180

5) stuck > but good value

6) enquiry only at this stage

7) going going

8) enquiry only at this stage

9) enquiry only at this stage

I'm in lower Blue Mtns Mike or 2 days a week in Sydney. Would you like to PM me with your specific request?

That wheel does look hideous haha, but adds fast and furious style points :P

Hehe... Well someone in Japan liked it Nathan, but he hasn't 'fessed up yet!

Well he can have it back for $170.

Only a couple of old style Nismo stickers left.

Plenum has gone.

I still have to get a pic of the BNR32 OEM steering wheel. Sorry about that.

  • Like 1

Dstrbu has promised over the past 3 wks to send them to me. Still waiting I'm afraid.

I'll PM you if/when they arrive. I've been patient. Thanks for being patient too.

Dstrbu has promised over the past 3 wks to send them to me. Still waiting I'm afraid.

I'll PM you if/when they arrive. I've been patient. Thanks for being patient too.

No worries. Let me know once you receive them. I'm assuming the inserts are genuine as well?

I really really hope so ay?

Last night - late last night - the OEM steering wheel sold. Many thanks and congrats!

Yes, the OEM steering wheel is now sold.

May I interest anyone here about this one though? Now $150.

Terry-43_zpsb8c53aab.jpg

In 28 days, I might have to give it away. How about as a fathers' day prezzie?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...