Jump to content
SAU Community

Parts Sale (Rb26 And Turbo Accessories)

Uncustom
 Share

Recommended Posts

Uncustom Collaborator

Uncustom

Posted
Posted (edited)

Hi guys,

got a few items up for sale. All located in Perth, Western Australia. But will ship at buyer's expense.

1. 2x Garrett GT2860-5s - Brand new in box condition - $2400

2. RB26 AWD sump (standard capacity) removed from 32 GTR with 4.111 front diff - Good working condition - $200

3. GReddy Profec B SpecII Black edition boost controller with solenoid - Good working condition - $320

4. Turbosmart Progate 50mm external wastegate - As new condition - $550

5. 6x Bosch ID2000 injectors (these are 2200cc) - Brand new, includes plugs but just needs top hats to suit either 11mm or 14mm rail which can be bought for very cheap at sonic performance/MTQ - $800

6. Sard Racing 11mm RB26 fuel rail with lines and fittings - good condition - $250

I will try to add pictures soon, but for now, just give me a text on 0411 271 646 or PM me and I will get you some pics.

Thanks.

Edited by Uncustom

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • Dose Pipe Sutututu
      RB25DE NEO with Haltech ECU

      By Dose Pipe Sutututu · Posted

      post up screen shots of your injector tables
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • feartherb26
      RB25DE NEO with Haltech ECU

      By feartherb26 · Posted

      I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...