Jump to content
SAU Community

Tommi Makinen Evo 6.5 Forged Engine Big Power Swap

bawgy

By bawgy,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

bawgy Enthusiast

bawgy

Posted
Posted

Located in Sydney $25000.

Looking to sell or possibly swaps for gtr r33 only. 2000 tommi makinen evo 6.5 satellite silver this car is flawless. This is a very quick run down. Jdm imported 2007, Engine fully rebuilt with over 30 pages of receipts for all work done about 4000 kms ago , also have Japanese de-reg papers and Australian import papers verifying the kms. Body is great and then interior is flawless no wear on seats and the interior is black not the faded purple they tend to go with age, this car looks standard until you put your foot down. You will not find a tidier example that has this package. Interested in swaps but as always prefer cash. Power wise it sitting at 250kws at 19psi turbo is good for 30psi but really the car need bigger injectors to run higher but I feel 250 is more than enough for street use.

ENGINE

rebuild 4000kms ago has

Weisco pistons, Eagles rods, Arp bolts, balance bar removal kit, larger cam lifters, as well as $1500 worth of block and head work cleaning shaping etc, Ralliart ecu, tomei arms M7960 turbo, super spark coil packs.

ALSO INCLUDES

Invida dump pipe, tomei front pipe and full 3 inch exhaust, plazaman hotside piping, Walbro 255 fuel pump, injectors cleaned and flowed, 6 puck clutch, evo 7 fly wheel,

Intima front and rear pads, innovate wide band o2 sensor, greedy boost gauge, original keys and immobiliser, kumho ku36 tyres, hid headlight kit.

Also air con hasn't being re-gassed after engine was out I'll also can work that into negotiations need be happy to do, hopefully the photos worked for anymore info please contact me on 0404921001 post-134864-0-85506100-1412584506_thumb.jpgpost-134864-0-64772700-1412584565_thumb.jpgpost-134864-0-36412200-1412584592_thumb.jpgpost-134864-0-51493000-1412584621_thumb.jpgpost-134864-0-51493000-1412584621_thumb.jpgpost-134864-0-45681700-1412584674_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...