Jump to content
SAU Community

Recommended Posts

Hey Guys, I'm new to this and joined to see if anybody could help me. I have a skyline gtst r33 and recently it started stalling with out any reason (it's automatic trans.). Whether the engine is hot or cold or while driving it'll just stall. I went to Sinergymotor Sport and told them to do a service and check what's going on. They didn't find any ECU fault codes. Fuel pressure no fault when road tested with fuel pressure gauge. Has anything like that happened to anyone before? The shop just told me to come back when the fault becomes more regular as it only stalled twice for them and then just run perfect. After picking the car up from them it stalled on the way home while driving. I live in Oakden SA. If you can maybe recommend to see a workshop that is in the area or have any other suggestions.

Link to comment
https://www.sau.com.au/forums/topic/449516-gtst-r33-engine-stall/
Share on other sites

No its pretty much standard.

It's either standard or not. Not pretty much standard .

Time and time again people say their cars standard, and a few pages in we find out there's something not standard about it that causes the issue.

I'm not being a dick. Are there any mods?

Sorry mate. No there isn't any mods except for a nismo exhaust.

Ok. Intermittent problems totally suck. The two things I would be looking at are the afm and the cas.

Starting with the afm clean it, Google how to.

You don't want to be buying parts at random, so ideally you could try a borrow a known working one before buying your own.

  • Like 1

^^ as mentioned above. Give the AFM a good clean, take it for a run and see how that goes.

Also by getting Synergy to do a service, what was done as part of the servicing?

Stalling is a known issue with the BOV being blocked off, even though I have yet to experience it for myself as yet.

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...