Jump to content
SAU Community

Recommended Posts

Hey Guys,

I am new to the forums and a new member to skylines Aus. So not 100% on how this works or where i should be posting this, But i'm searching for a Nismo Dash Cluster for an R33 GTR iv'e searched high and low at this stage and they are extremely hard to find apparently.

But if anyone knows of someone selling one or knows of a place to check that would be much appreciated.

post-137283-0-08477900-1415037060_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/450335-nismo-dash-cluster-for-r33-gtr/
Share on other sites

Not manufactured anymore so going for top dollar $$$

The one in the link is used and auction still going so will probably go higher.

Been seeing them go for crazy prices.

Sent you pm about brand new one.

Well the one on Yahoo Japan via Import Monster is already at 43,000yen so call it roughly $440 on exchange. (remember top rate on xe.com or such is not the rate say a import company will get, they will be getting mid rates)

Then throw on the following

gst : $44

Yahoo and japan domestic fees : about 6-700 yen total so around $7

Then it has to be shipped from seller to import company so around $15

Then import company fee say 10% of purchase price : $44

Then post to Oz by EMS : about $48

So already your looking at total of just under $600 delivered for a 2nd hand unit and this auction hasn't finished yet.

Recently saw a second hand one go to UK buyer for around $750 delivered.

Price has jumped for them very quickly and new ones get snapped up like lightning.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...