Jump to content
SAU Community

Recommended Posts

Hi All,


Looking for a set of Volk TE37 OR TE37SL (19 x 10.5 +12) with or without tyres.


I am after 19 x 10.5 +12 only please, no other size variations.


Please PM or call me on 0468 895 020 with your asking price, condition and location.


Preference is for a set located in Sydney, however freight is also an option.


Thanks.

i will be selling my TE37 TTA Rims.
they are 19x10.5 +15 with Falken 452's (275's) tyres have probably done 3000km

im looking for $3000

check my build thread link in my signature for what they look like.

rims alone cost me $3300

Looking for smaller wheels and full black w/o chrome. You don't still have the rota's do you?
I looked over your build and it's f**king amazing. why would you sell that beast for?

i do still have my rota grids yes, but they will be sold with the GTR and i am keeping my TE37's or might sell them thats why i wrote in here.
no dramas , why do you want such little wheels for your 33, you need to go at least 18 or 19 for a nice size and offset.
im selling as i want to buy a house, so if you know anyone thats looking for an amzing 34 let them know ;)

I might buy rotas brand new, they are cheap compared to rays.
I have 235/40r 18inch and they are low profile (imo), I don't like them because they are chrome (embarrassed to be seen with anything chrome). I don't understand tyres/wheels. I might go 18 or 19's if i can get more profile. need more rubber, worried about cracking wheel on pot hole or something.
I'd buy if i had the money. looks like such a sweet car!

they are pretty cheap.

you could go a 235/35/18.... i dont know much about 33 gts-t fitment, but i would be looking around the 18x8.5 + 15 front and 18x9.5 + 20 rear

but have a search on here its been covered heaps im sure.

Yeah i will. I don't understand what this means "18x8.5 + 15 front and 18x9.5 + 20 rear"
18 is inch. what's 8.5 and +15? Guessing profile and width.
Cheers heaps for your help

www.willtheyfit.com
is the best site to help you work out.
18 x 8.5 + 15
18 is the size or the height ....you should know that.
8.5 is the width of the rim how wide it is.
+15 is the offset, so where the middle of the rim bolts onto the hubs.
for example an offset of 0 will be the centre of the rim and it will bolt onto the hub in the dead centre of the rim.
an offset of + anything means where the rim bolts onto the hub will be towards the outside of the rim letting the rim sit further inside or under the guards

an offset of - anything means where the rim bolts onto the hub will be towards the inside of the rim letting the rim sit further outside the guards or towards the car next to you.

its hard to get your head around if you have never learnt about it. but once you understand and read up on it you will understand it.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...